Re: Please pull 'upstream-rtl8187' branch of wireless-2.6
From: Jeff Garzik <hidden>
Date: 2007-05-09 23:12:42
Also in:
linux-wireless
Possibly related (same subject, not in this thread)
- 2007-05-10 · Re: Please pull 'upstream-rtl8187' branch of wireless-2.6 · David Miller <davem@davemloft.net>
- 2007-05-10 · Re: Please pull 'upstream-rtl8187' branch of wireless-2.6 · Michael Buesch <hidden>
- 2007-05-10 · Re: Please pull 'upstream-rtl8187' branch of wireless-2.6 · Michael Wu <hidden>
- 2007-05-10 · Re: Please pull 'upstream-rtl8187' branch of wireless-2.6 · Jeff Garzik <hidden>
- 2007-05-10 · Re: Please pull 'upstream-rtl8187' branch of wireless-2.6 · Michael Wu <hidden>
John W. Linville wrote:
+static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
+{
+ eeprom->reg_data_clock = 1;
+ eeprom->register_write(eeprom);
+ udelay(1);
+}
+
+static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
+{
+ eeprom->reg_data_clock = 0;
+ eeprom->register_write(eeprom);
+ udelay(1);
+}udelay-after-write normally indicates a PCI posting bug (or USB bus delay bug)
+void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, const u8 word,
+ u16 data)
+{
+ u16 command;
+
+ /*
+ * select the ewen opcode.
+ */
+ eeprom_93cx6_ewen(eeprom);
+
+ /*
+ * Initialize the eeprom register
+ */
+ eeprom_93cx6_startup(eeprom);
+
+ /*
+ * Select the write opcode and the word to be read.
+ */
+ command = (PCI_EEPROM_WRITE_OPCODE << eeprom->width) | word;
+ eeprom_93cx6_write_bits(eeprom, command,
+ PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+ /*
+ * Write the requested 16 bits.
+ */
+ eeprom_93cx6_write_bits(eeprom, data, 16);
+
+ /*
+ * Cleanup eeprom register.
+ */
+ eeprom_93cx6_cleanup(eeprom);
+
+ /*
+ * Take a short break.
+ */
+ msleep(10000);WTF? First of all, use ssleep() Second of all, include a non-sarcastic comment that actually describes the reason for the delay, and why it needs to be so long.
+static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr)
+{
+ u8 val;
+
+ usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+ RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+ return val;
+}
+
+static inline u16 rtl818x_ioread16(struct rtl8187_priv *priv, __le16 *addr)
+{
+ __le16 val;
+
+ usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+ RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+ return le16_to_cpu(val);
+}
+
+static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
+{
+ __le32 val;
+
+ usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+ RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+ return le32_to_cpu(val);
+}Return value should be __le32, etc. Was this driver checked with sparse?
+void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ data <<= 8;
+ data |= addr | 0x80;
+
+ rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
+ rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
+ rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
+ rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
+
+ mdelay(1);unexplained delay -- write flush bug?
+static int rtl8187_init_hw(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u8 reg;
+ int i;
+
+ /* reset */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+ mdelay(200);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
+ mdelay(200);ditto also, kill the magic numbers
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg &= (1 << 1);
+ reg |= RTL818X_CMD_RESET;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ i = 10;
+ do {
+ mdelay(2);
+ if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
+ RTL818X_CMD_RESET))
+ break;
+ } while (--i);
+
+ if (!i) {
+ printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
+ return -ETIMEDOUT;
+ }
+
+ /* reload registers from eeprom */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
+
+ i = 10;
+ do {
+ mdelay(4);
+ if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
+ RTL818X_EEPROM_CMD_CONFIG))
+ break;
+ } while (--i);
+
+ if (!i) {
+ printk(KERN_ERR "%s: eeprom reset timeout!\n",
+ wiphy_name(dev->wiphy));
+ return -ETIMEDOUT;
+ }
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ /* setup card */
+ rtl818x_iowrite8(priv, (u8 *)0xFF85, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+
+ rtl818x_iowrite8(priv, (u8 *)0xFF85, 4);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
+ rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ for (i = 0; i < ETH_ALEN; i++)
+ rtl818x_iowrite8(priv, &priv->map->MAC[i], priv->hwaddr[i]);
+
+ rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
+ reg &= 0x3F;
+ reg |= 0x80;
+ rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+ rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+ rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
+
+ // TODO: set RESP_RATE and BRSR properly
+ rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
+ rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+
+ /* host_usb_init */
+ rtl818x_iowrite8(priv, (u8 *)0xFF85, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+ reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
+ rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
+ rtl818x_iowrite8(priv, (u8 *)0xFF85, 4);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
+ rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
+ mdelay(100);
+
+ rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
+ rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
+ rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
+ mdelay(100);
+
+ priv->rf_init(dev);
+
+ rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+ reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & 0xfffe;
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 0x1);
+ rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
+ rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
+ rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);this entire function can run for a very long time, without scheduling
+static void rtl8187_set_channel(struct ieee80211_hw *dev, int channel)
+{
+ u32 reg;
+ struct rtl8187_priv *priv = dev->priv;
+
+ reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+ /* Enable TX loopback on MAC level to avoid TX during channel
+ * changes, as this has be seen to causes problems and the
+ * card will stop work until next reset
+ */
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+ reg | RTL818X_TX_CONF_LOOPBACK_MAC);
+ mdelay(10);
+ rtl8225_rf_set_channel(dev, channel);
+ mdelay(10);
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);explanation of delays?
+static int rtl8187_stop(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ struct rtl8187_rx_info *info;
+ struct sk_buff *skb;
+ u32 reg;
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg &= ~RTL818X_CMD_TX_ENABLE;
+ reg &= ~RTL818X_CMD_RX_ENABLE;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ rtl8225_rf_stop(dev);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ while ((skb = skb_dequeue(&priv->rx_queue))) {
+ info = (struct rtl8187_rx_info *)skb->cb;
+ if (!info->urb)
+ continue;This seems an invalid use of skb->cb. Don't use skb->cb.
+static void rtl8187_register_write(struct eeprom_93cx6 *eeprom)
+{
+ struct ieee80211_hw *dev = eeprom->data;
+ struct rtl8187_priv *priv = dev->priv;
+ u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
+
+ if (eeprom->reg_data_in)
+ reg |= RTL818X_EEPROM_CMD_WRITE;
+ if (eeprom->reg_data_out)
+ reg |= RTL818X_EEPROM_CMD_READ;
+ if (eeprom->reg_data_clock)
+ reg |= RTL818X_EEPROM_CMD_CK;
+ if (eeprom->reg_chip_select)
+ reg |= RTL818X_EEPROM_CMD_CS;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
+ udelay(10);questionable delay
+ eeprom.data = dev; + eeprom.register_read = rtl8187_register_read; + eeprom.register_write = rtl8187_register_write; + if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) + eeprom.width = PCI_EEPROM_WIDTH_93C66; + else + eeprom.width = PCI_EEPROM_WIDTH_93C46; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + udelay(10);
ditto
+ * Radio tuning for RTL8225 on RTL8187
this file is full of questionable delays -- these sorts of things tend to not be as accurate as you think, across all platforms, due to PCI posting and/or USB bus delays
+void rtl8225z2_rf_init(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ int i;
+
+ rtl8225_write(dev, 0x0, 0x2BF); mdelay(1);
+ rtl8225_write(dev, 0x1, 0xEE0); mdelay(1);
+ rtl8225_write(dev, 0x2, 0x44D); mdelay(1);
+ rtl8225_write(dev, 0x3, 0x441); mdelay(1);
+ rtl8225_write(dev, 0x4, 0x8C3); mdelay(1);
+ rtl8225_write(dev, 0x5, 0xC72); mdelay(1);
+ rtl8225_write(dev, 0x6, 0x0E6); mdelay(1);
+ rtl8225_write(dev, 0x7, 0x82A); mdelay(1);
+ rtl8225_write(dev, 0x8, 0x03F); mdelay(1);
+ rtl8225_write(dev, 0x9, 0x335); mdelay(1);
+ rtl8225_write(dev, 0xa, 0x9D4); mdelay(1);
+ rtl8225_write(dev, 0xb, 0x7BB); mdelay(1);
+ rtl8225_write(dev, 0xc, 0x850); mdelay(1);
+ rtl8225_write(dev, 0xd, 0xCDF); mdelay(1);
+ rtl8225_write(dev, 0xe, 0x02B); mdelay(1);
+ rtl8225_write(dev, 0xf, 0x114); mdelay(100);
+
+ rtl8225_write(dev, 0x0, 0x1B7);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+ rtl8225_write(dev, 0x1, i + 1);
+ rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
+ }
+
+ rtl8225_write(dev, 0x3, 0x080);
+ rtl8225_write(dev, 0x5, 0x004);
+ rtl8225_write(dev, 0x0, 0x0B7);
+ rtl8225_write(dev, 0x2, 0xc4D);
+
+ mdelay(200);
+ rtl8225_write(dev, 0x2, 0x44D);
+ mdelay(100);
+
+ if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+ rtl8225_write(dev, 0x02, 0x0C4D);
+ mdelay(200);
+ rtl8225_write(dev, 0x02, 0x044D);
+ mdelay(100);
+ if (!(rtl8225_read(dev, 6) & (1 << 7)))
+ printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
+ wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
+ }
+
+ mdelay(200);
+
+ rtl8225_write(dev, 0x0, 0x2BF);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+ rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+ mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+ mdelay(1);
+ }
+
+ mdelay(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x00, 0x01); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x01, 0x02); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x02, 0x42); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x03, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x04, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x05, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x06, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x07, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x08, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0a, 0x08); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
+ rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x10, 0x84); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x11, 0x07); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x12, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x13, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x14, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x16, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x17, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0xef); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x19, 0x19); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1b, 0x15); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x21, 0x17); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x22, 0x16); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x23, 0x80); mdelay(1); //FIXME: not needed?
+ rtl8225_write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x25, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x0b, rtl8225z2_gain_bg[4 * 3]);
+ rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225z2_gain_bg[4 * 3 + 1]);
+ rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225z2_gain_bg[4 * 3 + 2]);
+ rtl8225_write_phy_ofdm(dev, 0x21, 0x37);
+
+ rtl8225_write_phy_cck(dev, 0x00, 0x98); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x03, 0x20); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x04, 0x7e); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x05, 0x12); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x06, 0xfc); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x07, 0x78); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x08, 0x2e); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x11, 0x88); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x12, 0x47); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+ rtl8225_write_phy_cck(dev, 0x19, 0x00);
+ rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+ rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+ rtl8225_write_phy_cck(dev, 0x40, 0x86);
+ rtl8225_write_phy_cck(dev, 0x41, 0x8d); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x42, 0x15); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x43, 0x18); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x44, 0x36); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x45, 0x35); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x46, 0x2e); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x47, 0x25); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x48, 0x1c); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x49, 0x12); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x4a, 0x09); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x4b, 0x04); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x4c, 0x05); mdelay(1);
+
+ rtl818x_iowrite8(priv, (u8 *)0xFF5B, 0x0D); mdelay(1);
+
+ rtl8225z2_rf_set_tx_power(dev, 1);
+
+ /* RX antenna default to A */
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1); /* B: 0xDB */
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* B: 0x10 */
+
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
+ mdelay(1);
+ rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);completely insane, unacceptable amount of "freezing the kernel" in mdelay()
quoted hunk ↗ jump to hunk
+++ b/drivers/net/wireless/rtl818x.h@@ -0,0 +1,212 @@ +#ifndef RTL818X_H +#define RTL818X_H + +struct rtl818x_csr { + u8 MAC[6]; + u8 reserved_0[2]; + __le32 MAR[2]; + u8 RX_FIFO_COUNT; + u8 reserved_1; + u8 TX_FIFO_COUNT; + u8 BQREQ; + u8 reserved_2[4]; + __le32 TSFT[2]; + __le32 TLPDA; + __le32 TNPDA; + __le32 THPDA; + __le16 BRSR; + u8 BSSID[6]; + u8 RESP_RATE; + u8 EIFS; + u8 reserved_3[1]; + u8 CMD; +#define RTL818X_CMD_TX_ENABLE (1 << 2) +#define RTL818X_CMD_RX_ENABLE (1 << 3) +#define RTL818X_CMD_RESET (1 << 4) + u8 reserved_4[4]; + __le16 INT_MASK; + __le16 INT_STATUS; +#define RTL818X_INT_RX_OK (1 << 0) +#define RTL818X_INT_RX_ERR (1 << 1) +#define RTL818X_INT_TXL_OK (1 << 2) +#define RTL818X_INT_TXL_ERR (1 << 3) +#define RTL818X_INT_RX_DU (1 << 4) +#define RTL818X_INT_RX_FO (1 << 5) +#define RTL818X_INT_TXN_OK (1 << 6) +#define RTL818X_INT_TXN_ERR (1 << 7) +#define RTL818X_INT_TXH_OK (1 << 8) +#define RTL818X_INT_TXH_ERR (1 << 9) +#define RTL818X_INT_TXB_OK (1 << 10) +#define RTL818X_INT_TXB_ERR (1 << 11) +#define RTL818X_INT_ATIM (1 << 12) +#define RTL818X_INT_BEACON (1 << 13) +#define RTL818X_INT_TIME_OUT (1 << 14) +#define RTL818X_INT_TX_FO (1 << 15) + __le32 TX_CONF; +#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17) +#define RTL818X_TX_CONF_NO_ICV (1 << 19) +#define RTL818X_TX_CONF_DISCW (1 << 20) +#define RTL818X_TX_CONF_R8180_ABCD (2 << 25) +#define RTL818X_TX_CONF_R8180_F (3 << 25) +#define RTL818X_TX_CONF_R8185_ABC (4 << 25) +#define RTL818X_TX_CONF_R8185_D (5 << 25) +#define RTL818X_TX_CONF_HWVER_MASK (7 << 25) +#define RTL818X_TX_CONF_CW_MIN (1 << 31) + __le32 RX_CONF; +#define RTL818X_RX_CONF_MONITOR (1 << 0) +#define RTL818X_RX_CONF_NICMAC (1 << 1) +#define RTL818X_RX_CONF_MULTICAST (1 << 2) +#define RTL818X_RX_CONF_BROADCAST (1 << 3) +#define RTL818X_RX_CONF_DATA (1 << 18) +#define RTL818X_RX_CONF_CTRL (1 << 19) +#define RTL818X_RX_CONF_MGMT (1 << 20) +#define RTL818X_RX_CONF_BSSID (1 << 23) +#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28) +#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31) + __le32 INT_TIMEOUT; + __le32 TBDA; + u8 EEPROM_CMD; +#define RTL818X_EEPROM_CMD_READ (1 << 0) +#define RTL818X_EEPROM_CMD_WRITE (1 << 1) +#define RTL818X_EEPROM_CMD_CK (1 << 2) +#define RTL818X_EEPROM_CMD_CS (1 << 3) +#define RTL818X_EEPROM_CMD_NORMAL (0 << 6) +#define RTL818X_EEPROM_CMD_LOAD (1 << 6) +#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6) +#define RTL818X_EEPROM_CMD_CONFIG (3 << 6) + u8 CONFIG0; + u8 CONFIG1; + u8 CONFIG2; + __le32 ANAPARAM; + u8 MSR; +#define RTL818X_MSR_NO_LINK (0 << 2) +#define RTL818X_MSR_ADHOC (1 << 2) +#define RTL818X_MSR_INFRA (2 << 2) + u8 CONFIG3; +#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6) + u8 CONFIG4; +#define RTL818X_CONFIG4_POWEROFF (1 << 6) +#define RTL818X_CONFIG4_VCOOFF (1 << 7) + u8 TESTR; + u8 reserved_9[2]; + __le16 PGSELECT; + __le32 ANAPARAM2; + u8 reserved_10[12]; + __le16 BEACON_INTERVAL; + __le16 ATIM_WND; + __le16 BEACON_INTERVAL_TIME; + __le16 ATIMTR_INTERVAL; + u8 reserved_11[4]; + u8 PHY[4]; + __le16 RFPinsOutput; + __le16 RFPinsEnable; + __le16 RFPinsSelect; + __le16 RFPinsInput; + __le32 RF_PARA; + __le32 RF_TIMING; + u8 GP_ENABLE; + u8 GPIO; + u8 reserved_12[10]; + u8 TX_AGC_CTL; +#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0) +#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1) +#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2) + u8 TX_GAIN_CCK; + u8 TX_GAIN_OFDM; + u8 TX_ANTENNA; + u8 reserved_13[16]; + u8 WPA_CONF; + u8 reserved_14[3]; + u8 SIFS; + u8 DIFS; + u8 SLOT; + u8 reserved_15[5]; + u8 CW_CONF; +#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0) +#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1) + u8 CW_VAL; + u8 RATE_FALLBACK; + u8 reserved_16[25]; + u8 CONFIG5; + u8 TX_DMA_POLLING; + u8 reserved_17[2]; + __le16 CWR; + u8 RETRY_CTR; + u8 reserved_18[5]; + __le32 RDSAR; + u8 reserved_19[18]; + u16 TALLY_CNT; + u8 TALLY_SEL; +} __attribute__((packed));
enums have more visibility to the compiler and debugging tools Not pulled. Jeff