Thread (37 messages) 37 messages, 4 authors, 2007-04-05

Re: iproute2-2.6.20-070313 bug ?

From: Denys <hidden>
Date: 2007-03-22 12:46:20

Dear Sir

Already i sent. I will copy here also

Normal "patched by me" iproute2 

/sbin/tc qdisc del dev ppp0 root 
/sbin/tc qdisc add dev ppp0 root handle 1: prio 
/sbin/tc qdisc add dev ppp0 parent 1:1 handle 2: tbf buffer 1024kb latency 
500ms rate 128kbit peakrate 256kbit minburst 16384 
/sbin/tc filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip dst 
0.0.0.0/0 flowid 2:1 

tc(patched) monitor output 
deleted qdisc prio 1: dev ppp0 root bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 
1 1 1 1 
qdisc prio 1: dev ppp0 root bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 
qdisc tbf 2: dev ppp0 parent 1:1 rate 128000bit burst 1024Kb peakrate 
256000bit minburst 16Kb lat 500.0ms 
filter dev ppp0 parent 1: protocol ip pref 10 u32 fh 800::800 order 2048 key 
ht 800 bkt 0 flowid 2:1 
 match 00000000/00000000 at 16 

VISP-Office ~ #cat /proc/net/psched 
00000001 00000001 000f4240 000003e8 

Now running tc2, it is "stock" version 

/sbin/tc2 qdisc del dev ppp0 root 
/sbin/tc2 qdisc add dev ppp0 root handle 1: prio 
/sbin/tc2 qdisc add dev ppp0 parent 1:1 handle 2: tbf buffer 1024kb latency 
500ms rate 128kbit peakrate 256kbit minburst 16384 
/sbin/tc2 filter add dev ppp0 parent 1:0 protocol ip prio 10 u32 match ip dst 
0.0.0.0/0 flowid 2:1 

Monitor output: 
deleted qdisc prio 1: dev ppp0 root bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 
1 1 1 1 
qdisc prio 1: dev ppp0 root bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 
qdisc tbf 2: dev ppp0 parent 1:1 rate 128000bit burst 1024Kb peakrate 
256000bit minburst 16Kb lat 500.0ms 
filter dev ppp0 parent 1: protocol ip pref 10 u32 fh 800::800 order 2048 key 
ht 800 bkt 0 flowid 2:1 
 match 00000000/00000000 at 16 

VISP-Office ~ #cat /proc/net/psched 
00000001 00000001 000f4240 000003e8 

Sure when i run tc2 - i see in stats, when it stopped (tc - normal, tc2 - 
buggy): 
VISP-Office ~ #tc -s qdisc show dev ppp0 
qdisc ingress ffff: ---------------- 
Sent 184893 bytes 2311 pkt (dropped 0, overlimits 0 requeues 0) 
rate 0bit 0pps backlog 0b 0p requeues 0 
qdisc prio 1: bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 
Sent 7765 bytes 64 pkt (dropped 0, overlimits 0 requeues 0) 
rate 0bit 0pps backlog 0b 64p requeues 0 
qdisc tbf 2: parent 1:1 rate 128000bit burst 4294932937b peakrate 256000bit 
minburst 16Kb lat 4.2s 
Sent 7765 bytes 64 pkt (dropped 0, overlimits 64 requeues 0) 
rate 0bit 0pps backlog 0b 64p requeues 0 
VISP-Office ~ #tc2 -s qdisc show dev ppp0 
qdisc ingress ffff: ---------------- 
Sent 186423 bytes 2324 pkt (dropped 0, overlimits 0 requeues 0) 
rate 0bit 0pps backlog 0b 0p requeues 0 
qdisc prio 1: bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 
Sent 8677 bytes 77 pkt (dropped 0, overlimits 0 requeues 0) 
rate 0bit 0pps backlog 0b 77p requeues 0 
qdisc tbf 2: parent 1:1 rate 128000bit burst 4294932937b peakrate 256000bit 
minburst 16Kb lat 4.2s 
Sent 8677 bytes 77 pkt (dropped 0, overlimits 77 requeues 0) 
rate 0bit 0pps backlog 0b 77p requeues 0 

I wish this will be enough information. Thanks for your help!



On Thu, 22 Mar 2007 12:23:03 +0100, Patrick McHardy wrote
Denys wrote:
quoted
Possible i discovered bug, but maybe specific to my setup. 

In your sources (tc/tc_core.h) i notice 
#define TIME_UNITS_PER_SEC    1000000000 
When i change it to 
#define TIME_UNITS_PER_SEC      1000000.0 
(it was value before in sources) 
everythign works fine. Otherwise tbf not working at all, it is dropping 
all 
quoted
packets.

Did anyone test new iproute2 with tbf?
Yes, please send the commands you use.

--
Virtual ISP S.A.L.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help