Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64

Len Brown wrote:

quoted

..same problem with 2.6.20-rc3. Last worked with 
2.6.19-rc6-git12, so it was 2.6.19 where it failed.
    

quoted

Attaching both case1 normal, case2 acpi=noirq. With acpi=noirq ethernet 
doesn't get configured, route -n says it's an Unsupported operation, 
ifconfig only shows for localhost, ifconfig eth0 192.168.10.5 also 
complains of a config error.
    

It seems that the "acpi=noirq" (and probably also the acpi=off) case
is simply an additional broken case, not a success case to compare to.

The thing we really want to compare is dmesg and /proc/interrupts
from 2.6.19-rc6-git12, and the broken current release.
Perhaps you can put that info in the bug report when you file it.

thanks,
-Len



  

2.6.19-rc6-git12 fails in exactly the same way, from /var/log/messages 
it seems 2.6.19-rc6 19/11/06 first saw the problem, details later when I 
boot 2.6.19-rc5.
If I boot an affected kernel with the SuSEfirewall2 enabled and then 
stop the firewall, the problems goes away.
Regards
Sid.

-- 
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks