[PATCH] skge: don't clear MC state on link down
From: Stephen Hemminger <hidden>
Date: 2006-12-01 19:41:13
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
I would rather fix Andy's problem by not clearing multicast information on link down. Also, add code to restore multicast state after ethtool phy reset. Signed-off-by: Stephen Hemminger <redacted> --- drivers/net/skge.c | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index b294903..010fc65 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c@@ -2154,8 +2154,6 @@ static void yukon_link_down(struct skge_ int port = skge->port; u16 ctrl; - gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); - ctrl = gma_read16(hw, port, GM_GP_CTRL); ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl);
@@ -2167,7 +2165,6 @@ static void yukon_link_down(struct skge_ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, ctrl); } - yukon_reset(hw, port); skge_link_down(skge); yukon_init(hw, port);
@@ -2268,6 +2265,8 @@ static void skge_phy_reset(struct skge_p yukon_init(hw, port); } mutex_unlock(&hw->phy_mutex); + + dev->set_multicast_list(dev); } /* Basic MII support */
--
1.4.1