[PATCH 09/23] e1000: allow ethtool to pass arbitrary speed advertisment
From: Kok, Auke <hidden>
Date: 2006-09-19 17:19:58
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
With a patch, ethtool can now signify the driver to advertise more than just a single speed/duplex setting. This allows you to tell the card to advertise in 10/100 in any speed if you don't have a gigabit switch for instance. Signed-off-by: Jeff Kirsher <redacted> Signed-off-by: Auke Kok <redacted> --- drivers/net/e1000/e1000_ethtool.c | 10 +++------- 1 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 0d329d6..d8b9c3f 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c@@ -211,13 +211,9 @@ e1000_set_settings(struct net_device *ne ADVERTISED_FIBRE | ADVERTISED_Autoneg; else - hw->autoneg_advertised = ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full| - ADVERTISED_Autoneg | - ADVERTISED_TP; + hw->autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; ecmd->advertising = hw->autoneg_advertised; } else if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
--- Auke Kok [off-list ref]