Brent Cook wrote:

This patch disable interrupts on all ports during initialization. The current 
assumes that the firmware has already disabled all interrupts on all ports. 
We have encountered some boards that do not always disable interrupts (XES 
XPedite 6200 for instance) on a soft reset. This patch prevents a kernel 
panic if a packet is received before the DMA ring buffers are setup for a 
port on which interrupts are left enabled by the firmware.

You probably have bigger problems than the interrupt being left
enabled.  If the interrupt is left enabled, the DMA engine
is probably left enabled, and if a packet happens
to come in before the driver can properly configure them,
some random part of memory will get overwritten.
The firmware needs to disable this device before transferring
control to the kernel, both the interrupts and the DMA,
there is no way to fix this in the kernel.