On Wed, 2005-06-22 at 17:25 +0200, Eric Dumazet wrote:

Is there anything I can try to tune the coalescing ?
Being able to handle 100 packets each interrupt instead of one or two would certainly help.
I dont mind about latency. But of course I would like not to drop packets :)
But maybe the BCM5702 is not able to delay an interrupt ?

On the 5702 that supports CLRTCKS mode, you need to play around with the
following parameters in tg3.h. To reduce interrupts, you generally have
to increase the values.

#define  LOW_RXCOL_TICKS_CLRTCKS	 0x00000014
#define  LOW_TXCOL_TICKS_CLRTCKS	 0x00000048
#define  LOW_RXMAX_FRAMES		 0x00000005
#define  LOW_TXMAX_FRAMES		 0x00000035
#define  DEFAULT_RXCOAL_TICK_INT_CLRTCKS 0x00000014
#define  DEFAULT_TXCOAL_TICK_INT_CLRTCKS 0x00000014
#define  DEFAULT_RXCOAL_MAXF_INT	 0x00000005
#define  DEFAULT_TXCOAL_MAXF_INT	 0x00000005