Hi!

quoted

I agree.

There is a similar problem in the Acenic driver, it brings the
link up and receives broadcast packets as soon as the driver
is loaded.  Mostly this is because the driver inits the chip
and registers the IRQ handler at probe time, whereas nearly
every other driver does this at ->open() time.
 

The ipw2100 originally postponed doing any initialization until open was
called.  The problem at that time was that distributions were crafted to
rely on link detection (I believe via ethtoolop's get_link) before they
would bring the interface up.

With a wireless device, you don't have link until you are associated... 
chicken and egg.  The solution was to move initialization and
association to the probe.

I don't know if all the distributions have moved away from this model. 
If they have and the devices are brought up regardless of link, then
going back to delaying radio initialization until the open() is called
is workable. 

Ook, great, I see.
								Pavel