Re: [2.6.0-test1-mm1] TCP connections over ipsec hang after a few seconds

James Morris [off-list ref] writes:

On Sun, 20 Jul 2003, Sean Neakums wrote:

quoted

quoted

With the 100baseT configuration, are the systems on the same segment?

I'm connecting the two machines with a crossed-over cable.

I can't see anything strange here.  Can you confirm that you are seeing 
the pmtu messages for the crossover cable case?  If not, perhaps try 
manual configuration to rule out any racoon issues.

Yes.  I checked the logs after I did the recreation, and the pmtu
messages are definitely showing up in the crossover case.  Will retry
with manual config.