Re: how to set the configuration EEPROM back to the default setting

On Mon, 3 Feb 2003, [iso-8859-1] nadia houziri wrote:

  1)how can i please Set the configuration EEPROM back 

By using the DOS-based tool that you used to set it to coaxial :-)

2)but how can i to explicitly set the media 

The Scyld page that you mentioned exoplains this. IN /etc/modules.conf, 
you need something like:

options 3c59x 3

to select BNC.

3)how to change the EEPROM to switch?

If you mean by this to just change the EEPROM every time you boot to 
switch to a different media type, then you shouldn't do it !
The EEPROM has a limited amount of writes and at some point you will not 
be able to write to it anymore.

-- 
Bogdan Costescu

IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
E-mail: Bogdan.Costescu@IWR.Uni-Heidelberg.De