Hello all,
I have a T1/E1 device driver: ( completed till PCI initialization and other
device-internals initialization,including interrupts handling procedures),
now i am not understanding how to provide the interface to upper layers?. I
have walked through the lapb-module.txt and some code of IPX, but still the
things are not clear. Can any one help/guide me?
-Thanks
Hari

-----Original Message-----
From: netdev-bounce@oss.sgi.com [mailto:netdev-bounce@oss.sgi.com]On
Behalf Of Robert Olsson
Sent: Thursday, October 31, 2002 12:33 AM
To: Cheng Jin
Cc: jamal; netdev@oss.sgi.com
Subject: Re: Linux SMP on 2.4.18-3



Cheng Jin writes:

 > Out of curiosity, what is the maximum send rate (pps) under Linux
 > 2.4.18-3?  I read in the paper that sending across two Intel
Gbe with one
 > CPU gets up to 36o Kpps.

 Yes forwarding performance...

 A good chip/driver can itself do a lot more. I have seen very
decent numbers
 with e1000, tg3 and dl2k. For FE tulip has been a top performer for long
 time but  I also now see 144 kpps from my laptop w. 3c59x driver.

 Cheers.
						--ro