[PATCH v3 07/13] net: phy: add qca8081 get_features
From: Luo Jie <hidden>
Date: 2021-10-18 03:34:30
Also in:
netdev
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Reuse the at803x phy driver get_features excepting adding 2500M capability. Signed-off-by: Luo Jie <redacted> --- drivers/net/phy/at803x.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 42d3f8ccca94..0c22ef735230 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c@@ -719,6 +719,15 @@ static int at803x_get_features(struct phy_device *phydev) if (err) return err; + if (phydev->drv->phy_id == QCA8081_PHY_ID) { + err = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE); + if (err < 0) + return err; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported, + err & MDIO_PMA_NG_EXTABLE_2_5GBT); + } + if (phydev->drv->phy_id != ATH8031_PHY_ID) return 0;
@@ -1493,6 +1502,7 @@ static struct phy_driver at803x_driver[] = { .set_tunable = at803x_set_tunable, .set_wol = at803x_set_wol, .get_wol = at803x_get_wol, + .get_features = at803x_get_features, .suspend = genphy_suspend, .resume = genphy_resume, .read_status = qca808x_read_status,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project