On Tue, Aug 31, 2021 at 03:40:13PM +0200, Michael Walle wrote:

In linux both are identical, phy-mode is used more often, though. Also
for the ls1028a both phy-connection-type and phy-mode was used, one for
the enetc nodes and the other for the switch nodes. Unify them. But the
main reason for this is that the device tree files can be shared with
the u-boot ones; there the enetc driver only supports the "phy-mode"
property.

Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Walle <redacted>
---

Actually that is not really a valid reason in itself for this change.
The enetc U-Boot driver is perhaps a bit silly in that it calls
ofnode_read_string(dev_ofnode(dev), "phy-mode") manually, especially
since right below, it uses dm_eth_phy_connect() which searches for both.

So we are artificially restricting what we support. It would be fine to
do the dm_eth_phy_connect first, then use phy->interface for enetc_start_pcs().

Anyway, I do not mind the patch at all.

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>