Re: [PATCH v4 1/3] arm64: dts: mt8183: config dsi node
From: Matthias Brugger <matthias.bgg@gmail.com>
Date: 2021-01-31 15:03:56
Also in:
linux-arm-kernel, linux-devicetree, linux-mediatek
On 13/01/2021 12:03, Hsin-Yi Wang wrote:
Config dsi node for mt8183 kukui. Set panel and ports. Several kukui boards share the same panel property and only compatible is different. So compatible will be set in board dts for comparison convenience. Signed-off-by: Hsin-Yi Wang <redacted> Reviewed-by: Nicolas Boichat <redacted> ---
Whole series applied to v5.11-next/dts64 Thanks!
quoted hunk ↗ jump to hunk
change: v4: add backlight and enable mipi_tx0 --- .../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++ .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++ 2 files changed, 47 insertions(+)diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts index 47113e275cb52..721d16f9c3b4f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts@@ -16,3 +16,8 @@ / { model = "MediaTek krane sku176 board"; compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183"; }; + +&panel { + status = "okay"; + compatible = "boe,tv101wum-nl6"; +};diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index bf2ad1294dd30..da1e947587074 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi@@ -249,6 +249,36 @@ &cpu7 { proc-supply = <&mt6358_vproc11_reg>; }; +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + panel: panel@0 { + /* compatible will be set in board dts */ + reg = <0>; + enable-gpios = <&pio 45 0>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_pins_default>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + + ports { + port { + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>;@@ -290,6 +320,10 @@ &i2c6 { clock-frequency = <100000>; }; +&mipi_tx0 { + status = "okay"; +}; + &mmc0 { status = "okay"; pinctrl-names = "default", "state_uhs";@@ -547,6 +581,14 @@ pins_clk { }; }; + panel_pins_default: panel_pins_default { + panel_reset { + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>; + output-low; + bias-pull-up; + }; + }; + pwm0_pin_default: pwm0_pin_default { pins1 { pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;