Thread (10 messages) 10 messages, 3 authors, 2021-01-14

Re: [PATCH 1/3] dt-bindings: reset: microchip sparx5 reset driver bindings

From: Philipp Zabel <p.zabel@pengutronix.de>
Date: 2021-01-14 09:40:50
Also in: linux-arm-kernel, linux-devicetree

Hi Steen,

On Wed, 2021-01-13 at 21:19 +0100, Steen Hegelund wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
---
 .../bindings/reset/microchip,rst.yaml         | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/microchip,rst.yaml
diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
new file mode 100644
index 000000000000..b5526753e85d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/microchip,rst.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip Sparx5 Switch Reset Controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The Microchip Sparx5 Switch provides reset control and implements the following
+  functions
+    - One Time Switch Core Reset (Soft Reset)
+
+properties:
+  $nodename:
+    pattern: "^reset-controller@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,sparx5-switch-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  syscons:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description: Array of syscons used to access reset registers
+    minItems: 2
The order seems to be important in the driver, so this should specify
which is the CPU syscon and which is the GCB syscon. I'm not sure if it
would be better to have two separately named syscon properties with a
single phandle each.

regards
Philipp
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help