Re: [PATCH 2.6.10-rc3][PPC32] Fix Motorola PReP (PowerstackII Utah) PCI IRQ map
From: Sven Luther <hidden>
Date: 2005-02-26 06:14:14
Also in:
linuxppc-dev
On Sat, Feb 26, 2005 at 04:39:45AM +0100, Christian wrote:
Sven Luther wrote:quoted
Some backports that i got from the list. The complete list of patches is at : http://svn.debian.org/wsvn/kernel/trunk/kernel/source/kernel-source-2.6.8-2.6.8/debian/patches/?rev=0&sc=0dooh, these websvn patches are giving me a headache.... will have to learn /usr/bin/svn first :-\
Well : svn co svn://svn.debian.org/kernel/trunk/kernel/source/kernel-source-2.6.8-2.6.8/debian/patches
quoted
--- kernel-source-2.6.8.orig/arch/ppc/platforms/prep_pci.c 2004-12-28yes, the prep_pci.c and its irq-mappings. the PowerStackII lines were changed back and forth, and a current 2.6-BK is only different in one line to the patch you mentioned:
I guess the one line is the one for the IDE device, ..., indeed. The one line in question is to enable the onboard IDE controller, which exist but is probably not used, since the place on the board where it should be has no connector soldered. I hear that there is an IDE powerstack II model though, so ...
http://nerdbynature.de/bits/hal/2.6.11-rc5.patched/powerpc-prep-powerstack-irq_2.6.11-rc5.patch unfortunately it did not help either and i'll switch back to vanilla 2.6.8 again and hopefully find out exactly when scsi stopped working.
As i understand leigh's and other post, i believe that this is the fix, but that other stuff went in too which did break.
http://nerdbynature.de/bits/hal/2.6.11-rc5/ http://nerdbynature.de/bits/hal/2.6.11-rc5.patched/
Friendly, Sven Luther