[PATCH net-next v8 04/15] ibmveth: Refactor buffer pool management for per-queue MQ RX

From
Mingming Cao <hidden>
Date
2026-11-09 23:56:52
Also in
netdev
Reply to
Mingming Cao, 2026-11-09
Legacy ibmveth uses five adapter-level RX buffer pools (512 B through
64 KiB). pool_active[] enables the standard-MTU pools by default;
larger pools activate when MTU requires them. With single-queue RX
that set is shared on one completion path.

MQ requires the same pool model per queue: buffers post with
H_ADD_LOGICAL_LAN_BUFFERS_QUEUE against a queue handle and completions
return on that queue. Sharing pools across queues would mix ownership
and break queue-local replenish/drain/teardown.

Refactor around queue-local pools:

  rx_buff_pool[queue][pool]
  ibmveth_alloc_queue_buffer_pools()
  ibmveth_free_queue_buffer_pools()
  ibmveth_alloc_buffer_pools() / ibmveth_free_buffer_pools()

Queue 0 remains the template for pool geometry and activation policy
(size, buff_size, threshold, index, active). Queues 1..N copy that
metadata from queue 0, then allocate backing arrays/skbs per queue.
The existing poolN/ sysfs knobs stay adapter-wide on queue 0: writing
a pool size multiplies real memory by num_rx_queues (still 1 here).
Per-queue runtime state is exposed later via debugfs, not separate
per-queue pool sysfs nodes.

Wire the helpers into open()/close() in the same patch. Runtime
remains single-queue (num_rx_queues is still 1).

A pool allocation failure still unwinds through out_free_buffer_pools,
so the logical LAN registered just before is freed with
h_free_logical_lan() as on the other post-register failures.

Error handling is queue-safe: allocation failure unwinds only what
that queue allocated (then prior queues in the caller).
alloc_buffer_pool() already undoes its own partials, so this open-fail
slot is empty. Free paths release by real allocations
(free_map/dma_addr/skbuff) rather than pool->active, so a pool is
freed whether or not its active flag still matches its memory.

close() also reorders pool teardown ahead of cleanup_rx_resources()
and filter-list free. napi_disable() and free_irq() have already run,
so NAPI no longer references the pool buffers or RX completion queue,
and PHYP does not once h_free_logical_lan() has succeeded. A failed
free is logged and the memory is still released, as close() did
before this patch; the order of the frees does not change that.

Keep the legacy 64 KiB pool enabled by default at standard MTU (same
as single-queue policy).

Signed-off-by: Mingming Cao <redacted>
Reviewed-by: Dave Marquardt <redacted>
Tested-by: Shaik Abdulla <redacted>
---
Changes in v8:
- a pool allocation failure in open() unwinds through
  h_free_logical_lan(), as the merged open-fail fix does

Dropped from this series (merged fixes own them):
- commit 84bec0bf0352: commit-message shared-TX-index unwind paragraph
  (base owns the unwind)

Changes in v7:
- no P04 code change
- commit message: request_irq() failure also reached
  out_free_tx_ltb with i spent
- noted: err_cleanup comment reworded in P03
- noted: no Fixes: peel of the shared-i TX LTB leak (named
  in the v6 body after v5); standalone [PATCH net] after
  this series
- noted: no pool-before-register reorder here; P06 issues h_free
  on the pool-fail path, P07 allocates pools before register

Changes in v6:
- retarget the free-by-presence comment to the later resize paths;
  alloc_buffer_pool() already undoes its own partials, so this
  open-fail slot is empty
- use %u for the two num_rx_queues dbg prints
- noted: pool-fail after register without h_free_logical_lan predates
  this patch; the inline pool loop reached the same labels. P06
  issues h_free before the pool DMA; P07 moves pools ahead of
  register_rx_queues

Changes in v5:
- vs mailed v4: keep pool_active[] = {1,1,0,0,1} (v4 set the 64 KiB
  pool inactive). No code delta vs prior patches here; SQ large-receive /
  CMO stay at the historical baseline. change_mtu does not re-enable
  pool4 at MTU 1500; MQ memory pressure belongs at scale-up, not SQ
  default
- Unwind / free pools by real allocations (free_map/dma_addr/skbuff),
  not only pool->active, so open-fail cannot leak partially allocated
  pools (v4 fail path freed by active and skipped the failing pool)
- Clarify kdoc: free paths use allocation presence (not "all active");
  queue 1..N metadata copy from queue 0 (v4 said "queues 1-15" while
  MAX is still 1 here)
- Document poolN sysfs size multiplies by num_rx_queues (queue 0 is the
  shared template; no per-queue pool sysfs in this series)
- Call out close() pool-free before cleanup_rx_resources, after LAN/
  NAPI/IRQ teardown (order already in v4; spell it for later drain)

Changes in v4:
- Introduce the pool helpers in the same patch that wires their first
  open/close callers, instead of leaving unused statics.
- Copy pool->index when cloning queue-0 geometry to later queues
  (needed for correlators; also required by incremental resize).

 drivers/net/ethernet/ibm/ibmveth.c | 159 +++++++++++++++++++++++++----
 1 file changed, 139 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 68791402cd53..31fad7713dc7 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -678,6 +678,140 @@ static void ibmveth_rxq_no_skb(struct ibmveth_adapter *adapter,
 	schedule_work(&adapter->work);
 }
 
+/**
+ * ibmveth_free_queue_buffer_pools - Free buffer pools for a single queue
+ * @adapter: ibmveth adapter structure
+ * @queue: queue index
+ *
+ * Frees buffer pools that still hold allocations for the specified
+ * queue (by free_map / dma_addr / skbuff presence), regardless of the
+ * active flag.
+ */
+static void ibmveth_free_queue_buffer_pools(struct ibmveth_adapter *adapter,
+					    int queue)
+{
+	int i;
+
+	for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) {
+		struct ibmveth_buff_pool *pool =
+			&adapter->rx_buff_pool[queue][i];
+
+		/* Free by allocation presence, not by the active flag,
+		 * so a pool's memory is released whatever active says.
+		 */
+		if (pool->free_map || pool->dma_addr || pool->skbuff)
+			ibmveth_free_buffer_pool(adapter, pool);
+	}
+}
+
+/**
+ * ibmveth_alloc_queue_buffer_pools - Allocate buffer pools for a single queue
+ * @adapter: ibmveth adapter structure
+ * @queue: queue index
+ *
+ * Allocates backing storage for each active pool on @queue.
+ * Inactive pools (!active) are skipped. Pool metadata must be
+ * initialized before calling this function.
+ *
+ * Return: 0 on success, negative error code on failure
+ */
+static int ibmveth_alloc_queue_buffer_pools(struct ibmveth_adapter *adapter,
+					    int queue)
+{
+	struct net_device *netdev = adapter->netdev;
+	int i;
+
+	for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) {
+		struct ibmveth_buff_pool *bpool =
+			&adapter->rx_buff_pool[queue][i];
+
+		if (!bpool->active)
+			continue;
+
+		if (ibmveth_alloc_buffer_pool(bpool)) {
+			netdev_err(netdev,
+				   "queue %d pool %d alloc failed (size=%u count=%u)\n",
+				   queue, i,
+				   bpool->buff_size,
+				   bpool->size);
+			bpool->active = 0;
+			/* Undo the pools this queue already allocated; the
+			 * failed one freed its own partial allocation.
+			 */
+			ibmveth_free_queue_buffer_pools(adapter, queue);
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ibmveth_alloc_buffer_pools - Allocate buffer pools for all queues
+ * @adapter: ibmveth adapter structure
+ *
+ * Initializes pool metadata for queues 1-N from queue 0 settings,
+ * then allocates buffer pools for all queues using the helper function.
+ *
+ * Return: 0 on success, negative error code on failure
+ */
+static int
+ibmveth_alloc_buffer_pools(struct ibmveth_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int i, q, rc;
+
+	/* Initialize pool metadata for queues 1..N from queue 0 settings */
+	for (q = 1; q < adapter->num_rx_queues; q++) {
+		for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) {
+			struct ibmveth_buff_pool *src =
+				&adapter->rx_buff_pool[0][i];
+			struct ibmveth_buff_pool *dst =
+				&adapter->rx_buff_pool[q][i];
+
+			dst->size = src->size;
+			dst->index = src->index;
+			dst->buff_size = src->buff_size;
+			dst->threshold = src->threshold;
+			dst->active = src->active;
+		}
+	}
+
+	/* Allocate actual buffers for all queues */
+	for (q = 0; q < adapter->num_rx_queues; q++) {
+		rc = ibmveth_alloc_queue_buffer_pools(adapter, q);
+		if (rc) {
+			/* Free pools for all previous queues */
+			while (--q >= 0)
+				ibmveth_free_queue_buffer_pools(adapter, q);
+			return rc;
+		}
+	}
+
+	netdev_dbg(netdev, "allocated buffer pools for %u queue(s)\n",
+		   adapter->num_rx_queues);
+	return 0;
+}
+
+/**
+ * ibmveth_free_buffer_pools - Free buffer pools for all queues
+ * @adapter: ibmveth adapter structure
+ *
+ * Frees buffer pools for all queues using the helper function.
+ */
+static void
+ibmveth_free_buffer_pools(struct ibmveth_adapter *adapter)
+{
+	int q;
+
+	/* Free buffer pools for all queues */
+	for (q = 0; q < adapter->num_rx_queues; q++)
+		ibmveth_free_queue_buffer_pools(adapter, q);
+
+	netdev_dbg(adapter->netdev, "freed buffer pools for %u queue(s)\n",
+		   adapter->num_rx_queues);
+}
+
 /**
  * ibmveth_remove_buffer_from_pool - remove a buffer from a pool
  * @adapter: adapter instance
@@ -907,16 +1041,9 @@ static int ibmveth_open(struct net_device *netdev)
 		goto out_free_tx_ltb;
 	}
 
-	for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) {
-		if (!adapter->rx_buff_pool[0][i].active)
-			continue;
-		if (ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[0][i])) {
-			netdev_err(netdev, "unable to alloc pool\n");
-			adapter->rx_buff_pool[0][i].active = 0;
-			rc = -ENOMEM;
-			goto out_free_buffer_pools;
-		}
-	}
+	rc = ibmveth_alloc_buffer_pools(adapter);
+	if (rc)
+		goto out_free_buffer_pools;
 
 	/* NAPI can run as soon as it is enabled, from netpoll during the
 	 * direct close()/open() pairs or from a direct ibmveth_interrupt()
@@ -950,11 +1077,7 @@ static int ibmveth_open(struct net_device *netdev)
 	do {
 		lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
 	} while (H_IS_LONG_BUSY(lpar_rc) || (lpar_rc == H_BUSY));
-	while (--i >= 0) {
-		if (adapter->rx_buff_pool[0][i].active)
-			ibmveth_free_buffer_pool(adapter,
-						 &adapter->rx_buff_pool[0][i]);
-	}
+	ibmveth_free_buffer_pools(adapter);
 out_free_tx_ltb:
 	for (i = netdev->real_num_tx_queues - 1; i >= 0; i--)
 		ibmveth_free_tx_ltb(adapter, i);
@@ -1005,14 +1128,10 @@ static int ibmveth_close(struct net_device *netdev)
 
 	ibmveth_update_rx_no_buffer(adapter);
 
+	ibmveth_free_buffer_pools(adapter);
 	ibmveth_cleanup_rx_resources(adapter);
 	ibmveth_free_filter_list(adapter);
 
-	for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++)
-		if (adapter->rx_buff_pool[0][i].active)
-			ibmveth_free_buffer_pool(adapter,
-						 &adapter->rx_buff_pool[0][i]);
-
 	for (i = 0; i < netdev->real_num_tx_queues; i++)
 		ibmveth_free_tx_ltb(adapter, i);
 
-- 
2.50.1 (Apple Git-155)

Thread (34 messages) 34 messages, 3 authors, last reply 19h ago
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help