Re: [PATCH v7 2/5] serial: serialize asynchronous write wakeups with the port lock

Hi James,

A few issues in this patch across the serial drivers:

1. Recursive self-deadlock on ltq_port->lock in drivers/tty/serial/lantiq.c:

Inside lqasc_start_tx():

	spin_lock_irqsave(&ltq_port->lock, flags);
	uart_port_tx(port, ch,
		lqasc_tx_ready(port),
		writeb(ch, port->membase + LTQ_ASC_TBUF));
	spin_unlock_irqrestore(&ltq_port->lock, flags);

uart_port_tx() invokes uart_write_wakeup(port) while ltq_port->lock is still
held (nested inside port->lock). If anything in the wakeup path or printk()
invokes lqasc_console_write() (which takes spin_lock_irqsave(&ltq_port->lock,
flags) at line 612), the CPU will immediately self-deadlock on ltq_port->lock.
ltq_port->lock should not be held across uart_write_wakeup(port).

2. Missed unlocked callers in drivers/tty/serial/dz.c, drivers/tty/serial/zs.c,
and drivers/tty/serial/jsm/jsm_cls.c:

The commit description states:
"Ensure every driver caller of uart_write_wakeup(), directly or through
uart_port_tx*() and uart_handle_cts_change(), holds the port lock first."

However:
- In drivers/tty/serial/dz.c: dz_transmit_chars() (lines 266-288) only locks
  &dport->port around dz_stop_tx(), calling uart_fifo_get(&dport->port, &tmp)
  at line 267 and uart_write_wakeup(&dport->port) at line 281 without holding
  dport->port.lock.
- In drivers/tty/serial/zs.c: zs_transmit_chars() (line 641) only acquires
  &scc->zlock, so zs_raw_transmit_chars() calls uart_fifo_get(&zport->port, &ch)
  (line 621) and uart_write_wakeup(&zport->port) (line 630) without holding
  zport->port.lock. In addition, zs_status_handle() (lines 673-680) drops
  &scc->zlock and calls uart_handle_cts_change(uport, ...) and
  uart_handle_dcd_change(uport, ...) with no lock held at all, which triggers
  lockdep_assert_held_once(&uport->lock) in serial_core.c.
- In drivers/tty/serial/jsm/jsm_cls.c: while jsm_neo.c wrapped
  neo_parse_modem() in scoped_guard(uart_port_lock_irqsave, &ch->uart_port),
  cls_parse_isr() in jsm_cls.c (line 585) still calls cls_parse_modem() ->
  uart_handle_dcd_change(&ch->uart_port, ...) without holding ch->uart_port.lock.

Also, in Patch 3/5, adding lockdep_assert_held_once(&port->lock); to
uart_write_wakeup() alongside uart_xmit_block() / uart_xmit_unblock() would
help catch any unlocked callers automatically.

Thanks,
Raul