[PATCH net-next v2 7/8] ibmveth: wait for in-flight transmits in ibmveth_close()

ibmveth_close() frees the TX buffers after netif_tx_stop_all_queues(),
which does not wait for an ibmveth_start_xmit() already running on
another CPU. That transmit can copy into a freed buffer and hand PHYP
a stale DMA address.

MTU, csum/TSO and buffer pool changes call ibmveth_close() directly
while traffic flows. ifdown and the reset work go through dev_close(),
which waits for running transmits only when the qdisc has an enqueue
function, so with noqueue they race the same way.

Use netif_tx_disable(), which waits for running transmits.

Found by AI-assisted review of the ibmveth multi-queue RX series and
confirmed by code inspection; the race was not reproduced. Tested on a
POWER10 LPAR with MTU changes during a ping flood, with no warnings. No
kernel selftests cover ibmveth.

Fixes: d6832ca48d8a ("ibmveth: Copy tx skbs into a premapped buffer")
Signed-off-by: Mingming Cao <redacted>
---

Changes in v2:
- commit message: dev_close() waits for running transmits only when
  the qdisc has an enqueue function, so ifdown and the reset work race
  the same way with noqueue

 drivers/net/ethernet/ibm/ibmveth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index e242417ed8da..db6188cefffe 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c

@@ -827,7 +827,7 @@ static int ibmveth_close(struct net_device *netdev)
 
 	napi_disable(&adapter->napi);
 
-	netif_tx_stop_all_queues(netdev);
+	netif_tx_disable(netdev);
 
 	h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
 

-- 
2.39.3 (Apple Git-146)