Thread (3 messages) flat view 3 messages, 2 authors, 4d ago

Re: [linuxppc-dev] Patch notification: 1 patch updated

From: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org>
Date: 2026-08-07 13:52:45

Possibly related (same subject, not in this thread)

Hi Christian,

Le 07/08/2026 à 15:44, Christian Zigotzky a écrit :
Hello,

I believe Patchwork did not fully associate the latest revision of my patch series with the previous one.
Not sure what you mean, in patchwork we have:

https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20260801043458.12500-1-chzigotzky@xenosoft.de/

So I marked following ones as been superseded by it:

https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20260701125941.906-2-chzigotzky@xenosoft.de/

https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20260701105501.2093-1-chzigotzky@xenosoft.de/

Did I miss something ?

Thanks
Christophe

quoted hunk ↗ jump to hunk
Please use the following latest patch.

Thanks,
Christian

—-
The Nemo board requires the PCIe ports to be initialized before the
SB600 ISA bridge can be accessed.

Since pas_pci_init() is now called later during boot, the i8259
initialization in pas_init_IRQ() happens too early and accesses
registers that are not yet mapped, preventing the board from booting.

Move the Nemo-specific i8259 initialization to pas_add_bridge(),
after the ISA bridge has been discovered.

Suggested-by: Darren Stevens <darren at stevens-zone.net>
Tested-by: Christian Zigotzky <chzigotzky at xenosoft.de>
Signed-off-by: Christian Zigotzky <chzigotzky at xenosoft.de>
---
  arch/powerpc/platforms/pasemi/pasemi.h |  6 ++++++
  arch/powerpc/platforms/pasemi/pci.c    |  5 +++++
  arch/powerpc/platforms/pasemi/setup.c  | 12 ++++--------
  3 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h
index 6f6743b8e48d..c37e5c684bb9 100644
--- a/arch/powerpc/platforms/pasemi/pasemi.h
+++ b/arch/powerpc/platforms/pasemi/pasemi.h
@@ -7,6 +7,12 @@ extern void pas_pci_init(void);
  struct pci_dev;
  extern void pas_pci_dma_dev_setup(struct pci_dev *dev);
  
+#ifdef CONFIG_PPC_PASEMI_NEMO
+extern void __init nemo_init_IRQ(void);
+#else
+static inline void __init nemo_init_IRQ(void) { }
+#endif
+
  void __iomem *__init pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset);
  
  extern void __init pasemi_map_registers(void);
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index 2df955274652..fb53782da7ec 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -265,6 +265,11 @@ static int __init pas_add_bridge(struct device_node *dev)
  	 */
  	isa_bridge_find_early(hose);
  
+	/*
+	 * ISA bridge is now active, add the i8259 cascade (if needed)
+	 */
+	nemo_init_IRQ();
+
  	return 0;
  }
  
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index d03b41336901..c410e29414ee 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -214,10 +214,12 @@ static void sb600_8259_cascade(struct irq_desc *desc)
  	chip->irq_eoi(&desc->irq_data);
  }
  
-static void __init nemo_init_IRQ(struct mpic *mpic)
+void __init nemo_init_IRQ(void)
  {
  	struct device_node *np;
  	int gpio_virq;
+	struct mpic *mpic;
+
  	/* Connect the SB600's legacy i8259 controller */
  	np = of_find_node_by_path("/pxp at 0,e0000000");
  	i8259_init(np, 0);
@@ -228,14 +230,10 @@ static void __init nemo_init_IRQ(struct mpic *mpic)
  	irq_set_chained_handler(gpio_virq, sb600_8259_cascade);
  	mpic_unmask_irq(irq_get_irq_data(gpio_virq));
  
+	mpic = irq_get_chip_data(gpio_virq);
  	irq_set_default_domain(mpic->irqhost);
  }
  
-#else
-
-static inline void nemo_init_IRQ(struct mpic *mpic)
-{
-}
  #endif
  
  static __init void pas_init_IRQ(void)
@@ -298,8 +296,6 @@ static __init void pas_init_IRQ(void)
  		mpic_unmask_irq(irq_get_irq_data(nmi_virq));
  	}
  
-	nemo_init_IRQ(mpic);
-
  	of_node_put(mpic_node);
  	of_node_put(root);
  }
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help