[PATCH net-next 08/14] net: enetc: remove invalid code from enetc4_pl_mac_link_up()
From: <hidden>
Date: 2026-06-30 07:49:52
Also in:
imx, linux-arm-kernel, lkml, netdev
Subsystem:
freescale enetc ethernet drivers, networking drivers, the rest · Maintainers:
Claudiu Manoil, Vladimir Oltean, Wei Fang, Clark Wang, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Wei Fang <wei.fang@nxp.com> When adding phylink MAC operations support to the NETC switch driver, Russell King pointed out several pieces of invalid logic in the .mac_link_up() implementation (see [1] and [2]): 1) Half-duplex backpressure is not supported by the kernel, Ethernet relies on packet dropping for congestion management. 2) phylink_autoneg_inband() is unnecessary, as RGMII in-band status is not supported. 3) TX and RX pause are disabled in half-duplex mode, so there is no need to override them in .mac_link_up(). The same invalid logic is also present in enetc4_pl_mac_link_up(), so remove the invalid code from it. Link: https://lore.kernel.org/imx/acEIQqI-_oyCym8O@shell.armlinux.org.uk/ (local) # 1 Link: https://lore.kernel.org/imx/acEFwqmAvWls_9Ef@shell.armlinux.org.uk/ (local) # 2 Signed-off-by: Wei Fang <wei.fang@nxp.com> --- .../net/ethernet/freescale/enetc/enetc4_hw.h | 1 - .../net/ethernet/freescale/enetc/enetc4_pf.c | 35 +------------------ 2 files changed, 1 insertion(+), 35 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc4_hw.h b/drivers/net/ethernet/freescale/enetc/enetc4_hw.h
index dea1fd0b8175..7a3ccc94b036 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc4_hw.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc4_hw.h@@ -198,7 +198,6 @@ #define PM_CMD_CFG_CNT_FRM_EN BIT(13) #define PM_CMD_CFG_TXP BIT(15) #define PM_CMD_CFG_SEND_IDLE BIT(16) -#define PM_CMD_CFG_HD_FCEN BIT(18) #define PM_CMD_CFG_SFD BIT(21) #define PM_CMD_CFG_TX_FLUSH BIT(22) #define PM_CMD_CFG_TX_LOWP_EN BIT(23)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc4_pf.c b/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
index b21ff362c31e..67aaf188d325 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc4_pf.c@@ -588,11 +588,6 @@ static void enetc4_mac_config(struct enetc_pf *pf, unsigned int mode, case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_TXID: val |= IFMODE_RGMII; - /* We need to enable auto-negotiation for the MAC - * if its RGMII interface support In-Band status. - */ - if (phylink_autoneg_inband(mode)) - val |= PM_IF_MODE_ENA; break; case PHY_INTERFACE_MODE_RMII: val |= IFMODE_RMII;
@@ -690,22 +685,6 @@ static void enetc4_set_rmii_mac(struct enetc_pf *pf, int speed, int duplex) enetc_port_mac_wr(si, ENETC4_PM_IF_MODE(0), val); } -static void enetc4_set_hd_flow_control(struct enetc_pf *pf, bool enable) -{ - struct enetc_si *si = pf->si; - u32 old_val, val; - - if (!pf->caps.half_duplex) - return; - - old_val = enetc_port_mac_rd(si, ENETC4_PM_CMD_CFG(0)); - val = u32_replace_bits(old_val, enable ? 1 : 0, PM_CMD_CFG_HD_FCEN); - if (val == old_val) - return; - - enetc_port_mac_wr(si, ENETC4_PM_CMD_CFG(0), val); -} - static void enetc4_set_rx_pause(struct enetc_pf *pf, bool rx_pause) { struct enetc_si *si = pf->si;
@@ -881,13 +860,11 @@ static void enetc4_pl_mac_link_up(struct phylink_config *config, struct enetc_pf *pf = phylink_to_enetc_pf(config); struct enetc_si *si = pf->si; struct enetc_ndev_priv *priv; - bool hd_fc = false; priv = netdev_priv(si->ndev); enetc4_set_port_speed(priv, speed); - if (!phylink_autoneg_inband(mode) && - phy_interface_mode_is_rgmii(interface)) + if (phy_interface_mode_is_rgmii(interface)) enetc4_set_rgmii_mac(pf, speed, duplex); if (interface == PHY_INTERFACE_MODE_RMII)
@@ -899,18 +876,8 @@ static void enetc4_pl_mac_link_up(struct phylink_config *config, */ if (priv->active_offloads & ENETC_F_QBU) tx_pause = false; - } else { /* DUPLEX_HALF */ - if (tx_pause || rx_pause) - hd_fc = true; - - /* As per 802.3 annex 31B, PAUSE frames are only supported - * when the link is configured for full duplex operation. - */ - tx_pause = false; - rx_pause = false; } - enetc4_set_hd_flow_control(pf, hd_fc); enetc4_set_tx_pause(pf, priv->num_rx_rings, tx_pause); enetc4_set_rx_pause(pf, rx_pause); enetc4_mac_tx_enable(pf);
--
2.34.1