Thread (6 messages) flat view 6 messages, 3 authors, 2026-02-28

Re: powerpc/fadump: CMA init is failing

From: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Date: 2026-02-28 02:41:15
Also in: linux-mm
Subsystem: linux for powerpc (32-bit and 64-bit), the rest · Maintainers: Madhavan Srinivasan, Linus Torvalds

Mike Rapoport [off-list ref] writes:
Hi Ritesh,

On Fri, Feb 27, 2026 at 10:39:53PM +0530, Ritesh Harjani wrote:
quoted
Sourabh Jain [off-list ref] writes:
quoted
I noticed CMA init for fadump crashkernel memory is failing.

[    0.000000] cma: pageblock_order not yet initialized. Called during 
early boot?
[    0.000000] fadump: Failed to init cma area for firmware-assisted 
dump,-22


kernel command-line:
BOOT_IMAGE=(ieee1275//vdevice/v-scsi@30000070/disk@8100000000000000,msdos2)/vmlinuz-7.0.0-rc1+ 
root=/dev/mapper/rhel_ltcden3--lp12-root ro 
rd.lvm.lv=rhel_ltcden3-lp12/root rd.lvm.lv=rhel_ltcden3-lp12/swap 
fadump=on crashkernel=3G


Same issue with kdump CMA reservation:

[    0.000000][    T0] cma: pageblock_order not yet initialized. Called 
during early boot?
Good that we added those debug prints ;)

I think I know what went wrong, as part of this arch,mm consolidation
patch series [1], I think the order of initialization is changed.

With this patch the new order is ... 
start_kernel()
    - setup_arch()
       - xxx_cma_reserve();
    - mm_core_init_early()
       - free_area_init()
          - sparse_init()
             - set_pageblock_order() // this sets the pageblock_order.

Whereas earlier set_pageblock_order() was called from initmem_init(),
just before cma reservations were being made. 

start_kernel()
    - setup_arch()
       - initmem_init()
         - sparse_init()
           - set_pageblock_order();  // this sets the pageblock_order
       - xxx_cma_reserve();

So that means, pageblock_order is not initialized before these cma
reservation function calls, hence we are seeing these failures.

setup_arch() {
    ...

	/*
	 * Reserve large chunks of memory for use by CMA for kdump, fadump, KVM and
	 * hugetlb. These must be called after initmem_init(), so that
	 * pageblock_order is initialised.
	 */
	fadump_cma_init();
	kdump_cma_reserve();
	kvm_cma_reserve();

    ...
}


So what if we do.. 

start_kernel() {
  ...
	setup_arch(&command_line);
	mm_core_init_early();
    setup_arch_post_mm_core_init(); // and here we call CMA reservation functions ?
 
Unless I'm missing something these cma reservations can be moved to
arch_mm_preinit().
It runs after mm_core_init_early() and before memblock moves the free
memory to the buddy.
Right. I think, we should be able to use that...

@Sourabh, 

I don't have access to the systems (travelling back...). Could you
please give this a try?

diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index cb5b73adc250..b1761909c23f 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -35,7 +35,6 @@
 #include <linux/of_irq.h>
 #include <linux/hugetlb.h>
 #include <linux/pgtable.h>
-#include <asm/kexec.h>
 #include <asm/io.h>
 #include <asm/paca.h>
 #include <asm/processor.h>
@@ -995,15 +994,6 @@ void __init setup_arch(char **cmdline_p)
 
 	initmem_init();
 
-	/*
-	 * Reserve large chunks of memory for use by CMA for kdump, fadump, KVM and
-	 * hugetlb. These must be called after initmem_init(), so that
-	 * pageblock_order is initialised.
-	 */
-	fadump_cma_init();
-	kdump_cma_reserve();
-	kvm_cma_reserve();
-
 	early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT);
 
 	if (ppc_md.setup_arch)
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 29bf347f6012..5ba947e4fe37 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -30,6 +30,10 @@
 #include <asm/setup.h>
 #include <asm/fixmap.h>
 
+#include <asm/fadump.h>
+#include <asm/kexec.h>
+#include <asm/kvm_ppc.h>
+
 #include <mm/mmu_decl.h>
 
 unsigned long long memory_limit __initdata;
@@ -268,6 +272,16 @@ void __init paging_init(void)
 
 void __init arch_mm_preinit(void)
 {
+
+	/*
+	 * Reserve large chunks of memory for use by CMA for kdump, fadump, KVM
+	 * and hugetlb. These must be called after pageblock_order is
+	 * initialised.
+	 */
+	fadump_cma_init();
+	kdump_cma_reserve();
+	kvm_cma_reserve();
+
 	/*
 	 * book3s is limited to 16 page sizes due to encoding this in
 	 * a 4-bit field for slices.


-ritesh
quoted
References:
[1]: https://lore.kernel.org/linuxppc-dev/20260111082105.290734-1-rppt@kernel.org/T/#m5adf1a845e0a0867066c4f7055f28e6304b73fa5 (local)
[2]: https://lore.kernel.org/all/3ae208e48c0d9cefe53d2dc4f593388067405b7d.1729146153.git.ritesh.list@gmail.com/ (local)


-ritesh
-- 
Sincerely yours,
Mike.
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help