[PATCH 11/12] i2c: amd756: use i2c_adapter-specific printk helpers

@@ -99,14 +99,14 @@ static int amd756_transaction(struct i2c_adapter *adap)
 	int result = 0;
 	int timeout = 0;
 
-	dev_dbg(&adap->dev, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, "
+	i2c_dbg(adap, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, "
 		"DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS),
 		inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS),
 		inb_p(SMB_HOST_DATA));
 
 	/* Make sure the SMBus host is ready to start transmitting */
 	if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
-		dev_dbg(&adap->dev, "SMBus busy (%04x). Waiting...\n", temp);
+		i2c_dbg(adap, "SMBus busy (%04x). Waiting...\n", temp);
 		do {
 			msleep(1);
 			temp = inw_p(SMB_GLOBAL_STATUS);

@@ -114,7 +114,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
 		         (timeout++ < MAX_TIMEOUT));
 		/* If the SMBus is still busy, we give up */
 		if (timeout > MAX_TIMEOUT) {
-			dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
+			i2c_dbg(adap, "Busy wait timeout (%04x)\n", temp);
 			goto abort;
 		}
 		timeout = 0;

@@ -131,38 +131,38 @@ static int amd756_transaction(struct i2c_adapter *adap)
 
 	/* If the SMBus is still busy, we give up */
 	if (timeout > MAX_TIMEOUT) {
-		dev_dbg(&adap->dev, "Completion timeout!\n");
+		i2c_dbg(adap, "Completion timeout!\n");
 		goto abort;
 	}
 
 	if (temp & GS_PRERR_STS) {
 		result = -ENXIO;
-		dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n");
+		i2c_dbg(adap, "SMBus Protocol error (no response)!\n");
 	}
 
 	if (temp & GS_COL_STS) {
 		result = -EIO;
-		dev_warn(&adap->dev, "SMBus collision!\n");
+		i2c_warn(adap, "SMBus collision!\n");
 	}
 
 	if (temp & GS_TO_STS) {
 		result = -ETIMEDOUT;
-		dev_dbg(&adap->dev, "SMBus protocol timeout!\n");
+		i2c_dbg(adap, "SMBus protocol timeout!\n");
 	}
 
 	if (temp & GS_HCYC_STS)
-		dev_dbg(&adap->dev, "SMBus protocol success!\n");
+		i2c_dbg(adap, "SMBus protocol success!\n");
 
 	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
 
 #ifdef DEBUG
 	if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) {
-		dev_dbg(&adap->dev,
+		i2c_dbg(adap,
 			"Failed reset at end of transaction (%04x)\n", temp);
 	}
 #endif
 
-	dev_dbg(&adap->dev,
+	i2c_dbg(adap,
 		"Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
 		inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
 		inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));

@@ -170,7 +170,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
 	return result;
 
  abort:
-	dev_warn(&adap->dev, "Sending abort\n");
+	i2c_warn(adap, "Sending abort\n");
 	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
 	msleep(100);
 	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);

@@ -233,7 +233,7 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
 		size = AMD756_BLOCK_DATA;
 		break;
 	default:
-		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		i2c_warn(adap, "Unsupported transaction %d\n", size);
 		return -EOPNOTSUPP;
 	}