Re: Kernel v6.17-rc4 with STATIC_CALL_SELFTEST=y enabled fails to boot at early stage (PowerMac G4 DP)

On Thu, 2025-09-04 at 14:33 +0530, Madhavan Srinivasan wrote:

quoted

quoted

I am using qemu with -M mac99 and it boots

Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
printk: legacy bootconsole [udbg0] enabled
-----------------------------------------------------
phys_mem_size     = 0x8000000
dcache_bsize      = 0x20

I am missing something here. Digging some more

Did you use the .config provided by Erhard ?

Oops. sorry for the noise

I noticed that I don't hit this using defconfigs (with JUMP_LABEL and
STATIC_CALL_SELFTEST manually enabled), so I did some config bisection with
Erhard's config.

It looks like you need CONFIG_KFENCE=y, and CONFIG_XMON=n.

Attached is a minimal config for current mainline, allnoconfig + CONFIG_PPC_PMAC
(so I can get console output in qemu) + CONFIG_KFENCE + CONFIG_JUMP_LABEL +
CONFIG_STATIC_CALL_SELFTEST.

Running with qemu-system-ppc -M mac99, we get the below.

Christophe: I'm not exactly sure what changes when you enable/disable KFENCE on
book3s32, but it looks to me like it affects whether .init.text is mapped using
BATs or not?

Andrew

---------------------------------

quoted

=============================================================
OpenBIOS 1.1 [Feb 12 2025 13:02]
Configuration device id QEMU version 1 machine id 1
CPUs: 1
Memory: 128M
UUID: 00000000-0000-0000-0000-000000000000
CPU type PowerPC,G4

milliseconds isn't unique.
Welcome to OpenBIOS v1.1 built on Feb 12 2025 13:02

quoted

[ppc] Kernel already loaded (0x01000000 + 0x004fcb28) (initrd 0x00000000 +

0x00000000)

quoted

[ppc] Kernel command line: console=serial
switching to new context:

OF stdout device is: /pci@f2000000/mac-io@c/escc@13000/ch-a@13020
Preparing to boot Linux version 6.17.0-rc4+ (ajd@jarvis.ozlabs.ibm.com)
(powerpc64-linux-gnu-gcc (GCC) 15.2.1 20250808 (Red Hat Cross 15.2.1-1), GNU ld
version 2.44-1.fc42) #2 Thu Sep  4 16:21:41 AEST 2025
Detected machine type: 00000400
command line:  
memory layout at init:
  memory_limit : 00000000 (16 MB aligned)
  alloc_bottom : 01501000
  alloc_top    : 08000000
  alloc_top_hi : 08000000
  rmo_top      : 08000000
  ram_top      : 08000000
found display   : /pci@f2000000/QEMU,VGA@e, opening... done
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x01502000 -> 0x015010a4
Device tree struct  0x01503000 -> 0x07de7eb0
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x01000000 ...
Hello World !
Total memory = 128MB; using 256kB for hash table
Linux version 6.17.0-rc4+ (ajd@jarvis.ozlabs.ibm.com) (powerpc64-linux-gnu-gcc
(GCC) 15.2.1 20250808 (Red Hat Cross 15.2.1-1), GNU ld version 2.44-1.fc42) #2
Thu Sep  4 16:21:41 AEST 2025
OF: reserved mem: Reserved memory: No reserved-memory node in the DT
ioremap() called early from pmac_feature_init+0xe0/0xb00. Use early_ioremap()
instead
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x07
Mapped at 0xffb9e000
ioremap() called early from probe_one_macio+0x134/0x24c. Use early_ioremap()
instead
Found a Keylargo mac-io controller, rev: 0, mapped at 0x(ptrval)
PowerMac motherboard: PowerMac G4 AGP Graphics
ioremap() called early from udbg_scc_init+0x190/0x398. Use early_ioremap()
instead
Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
printk: legacy bootconsole [udbg0] enabled
-----------------------------------------------------
phys_mem_size     = 0x8000000
dcache_bsize      = 0x20
icache_bsize      = 0x20
cpu_features      = 0x000000000401a008
  possible        = 0x00000000277de008
  always          = 0x0000000000000000
cpu_user_features = 0x8c000001 0x00000000
mmu_features      = 0x00000001
Hash_size         = 0x40000
Hash_mask         = 0xfff
-----------------------------------------------------
ioremap() called early from pmac_setup_arch+0x110/0x224. Use early_ioremap()
instead
WARNING ! Your machine is CUDA-based but your kernel
          wasn't compiled with CONFIG_ADB_CUDA option !
Zone ranges:
  DMA      [mem 0x0000000000000000-0x0000000007ffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Kernel panic - not syncing: arch_static_call_transform: patching failed
func_a+0x0/0x8 at 0x0
CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc4+ #2 NONE 
Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
Call Trace:
[c04b9eb0] [c0292e00] dump_stack_lvl+0x50/0x78 (unreliable)
[c04b9ed0] [c002d19c] vpanic+0xfc/0x2b4
[c04b9f00] [c002d3b0] cpu_mitigations_off+0x0/0x14
[c04b9f40] [c00127ac] fixup_cpc710_pci64+0x0/0x20
[c04b9f70] [c035082c] static_call_init+0x108/0x140
[c04b9fa0] [c0342ed0] start_kernel+0x78/0x4a8
[c04b9ff0] [00003500] 0x3500
Rebooting in 180 seconds..
-- 
Andrew Donnellan    OzLabs, ADL Canberra
ajd@linux.ibm.com   IBM Australia Limited