[PATCH 0/4] Add support of IRQs to QUICC ENGINE GPIOs

From
Christophe Leroy <hidden>
Date
2025-08-12 11:20:39
Also in
linux-arm-kernel, linux-devicetree, linux-gpio, lkml
The QUICC Engine provides interrupts for a few I/O ports. This is
handled via a separate interrupt ID and managed via a triplet of
dedicated registers hosted by the SoC.

Implement an interrupt driver for those IRQs then add IRQs capability to
the QUICC ENGINE GPIOs.

The number of GPIOs for which interrupts are supported depends on
the microcontroller:
- mpc8323 has 10 GPIOS supporting interrupts
- mpc8360 has 28 GPIOS supporting interrupts
- mpc8568 has 18 GPIOS supporting interrupts

Christophe Leroy (4):
  soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports
  soc: fsl: qe: Change GPIO driver to a proper platform driver
  soc: fsl: qe: Add support of IRQ in QE GPIO
  dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC
    Engine Ports

 .../soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml       |  63 +++++++
 drivers/soc/fsl/qe/Makefile                   |   2 +-
 drivers/soc/fsl/qe/gpio.c                     | 108 ++++++++----
 drivers/soc/fsl/qe/qe_ports_ic.c              | 156 ++++++++++++++++++
 4 files changed, 293 insertions(+), 36 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
 create mode 100644 drivers/soc/fsl/qe/qe_ports_ic.c

-- 
2.49.0

Thread (16 messages) 16 messages, 5 authors, last reply 2025-08-18
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help