[PATCH net-next v2 5/7] net: ethernet: fs_enet: fcc: use macros for speed and duplex values
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: 2024-08-29 16:15:45
Also in:
lkml, netdev
Subsystem:
freescale soc fs_enet driver, networking drivers, the rest · Maintainers:
Pantelis Antoniou, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The PHY speed and duplex should be manipulated using the SPEED_XXX and DUPLEX_XXX macros available. Use it in the fcc, fec and scc MAC for fs_enet. Acked-by: Christophe Leroy <redacted> Reviewed-by: Christophe Leroy <redacted> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- drivers/net/ethernet/freescale/fs_enet/mac-fcc.c | 4 ++-- drivers/net/ethernet/freescale/fs_enet/mac-fec.c | 2 +- drivers/net/ethernet/freescale/fs_enet/mac-scc.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
index add062928d99..056909156b4f 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c@@ -361,7 +361,7 @@ static void restart(struct net_device *dev) /* adjust to speed (for RMII mode) */ if (fpi->use_rmii) { - if (dev->phydev->speed == 100) + if (dev->phydev->speed == SPEED_100) C8(fcccp, fcc_gfemr, 0x20); else S8(fcccp, fcc_gfemr, 0x20);
@@ -387,7 +387,7 @@ static void restart(struct net_device *dev) S32(fccp, fcc_fpsmr, FCC_PSMR_RMII); /* adjust to duplex mode */ - if (dev->phydev->duplex) + if (dev->phydev->duplex == DUPLEX_FULL) S32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); else C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
index f75acb3b358f..855ee9e3f042 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c@@ -309,7 +309,7 @@ static void restart(struct net_device *dev) /* * adjust to duplex mode */ - if (dev->phydev->duplex) { + if (dev->phydev->duplex == DUPLEX_FULL) { FC(fecp, r_cntrl, FEC_RCNTRL_DRT); FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */ } else {
diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
index 29ba0048396b..9e5e29312c27 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c@@ -338,7 +338,7 @@ static void restart(struct net_device *dev) W16(sccp, scc_psmr, SCC_PSMR_ENCRC | SCC_PSMR_NIB22); /* Set full duplex mode if needed */ - if (dev->phydev->duplex) + if (dev->phydev->duplex == DUPLEX_FULL) S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE); /* Restore multicast and promiscuous settings */
--
2.45.2