On Thu, Jun 06, 2024 at 12:56:35PM +0530, Manivannan Sadhasivam wrote:

As like the 'epc_init' event, that is used to signal the EPF drivers about
the EPC initialization, let's introduce 'epc_deinit' event that is used to
signal EPC deinitialization.

The EPC deinitialization applies only when any sort of fundamental reset
is supported by the endpoint controller as per the PCIe spec.

Reference: PCIe Base spec v5.0, sections 4.2.4.9.1 and 6.6.1.

Currently, some EPC drivers like pcie-qcom-ep and pcie-tegra194 support
PERST# as the fundamental reset. So the 'deinit' event will be notified to
the EPF drivers when PERST# assert happens in the above mentioned EPC
drivers.

The EPF drivers, on receiving the event through the epc_deinit() callback
should reset the EPF state machine and also cleanup any configuration that
got affected by the fundamental reset like BAR, DMA etc...

This change also warrants skipping the cleanups in unbind() if already done
in epc_deinit().

Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <redacted>

Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>

[...]

Regards,
Siddharth.