On Thu, Nov 30, 2023 at 03:22:14PM -0500, Frank Li wrote:

On Thu, Nov 30, 2023 at 03:17:39PM -0500, Frank Li wrote:

quoted

On Thu, Nov 30, 2023 at 10:21:00PM +0530, Manivannan Sadhasivam wrote:

quoted

On Wed, Nov 29, 2023 at 04:44:12PM -0500, Frank Li wrote:

quoted

In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. This link would then enter
L2/L3 state depending on the VAUX supply.

In the resume path, the link is brought back from L2 to L0 by doing a
software reset.

Same comment on the patch description as on patch 2/4.

quoted

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v3 to v4
    - Call scfg_pcie_send_turnoff_msg() shared with ls1021a
    - update commit message
    
    Change from v2 to v3
    - Remove ls_pcie_lut_readl(writel) function
    
    Change from v1 to v2
    - Update subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 63 ++++++++++++++++++++-
 1 file changed, 62 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 590e07bb27002..d39700b3afaaa 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c

@@ -41,6 +41,15 @@
 #define SCFG_PEXSFTRSTCR	0x190
 #define PEXSR(idx)		BIT(idx)
 
+/* LS1043A PEX PME control register */
+#define SCFG_PEXPMECR		0x144
+#define PEXPME(idx)		BIT(31 - (idx) * 4)
+
+/* LS1043A PEX LUT debug register */
+#define LS_PCIE_LDBG	0x7fc
+#define LDBG_SR		BIT(30)
+#define LDBG_WE		BIT(31)
+
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {

@@ -225,6 +234,45 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
 }
 
+static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMECR, PEXPME(pcie->index));
+}
+
+static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	u32 val;
+
+	/*
+	 * Only way let PEX module exit L2 is do a software reset.

Can you expand PEX? What is it used for?

Also if the reset is only for the PEX module, please use the same comment in
both patches 2 and 4. Patch 2 doesn't mention PEX in the comment.

After read spec again, I think PEX is pci express. So it should software
reset controller. I don't know what exactly did in the chip. But without
below code, PCIe can't exit L2/L3.

Any harmful if dwc controller reset? Anyway these code works well with
intel network card.

Sorry, sent too quick. It is PCIe express wrapper

Copy from spec: 

"PEXLDBG[SR]. Once set the
PEXLDBG[SR] will enable the soft reset to the PEX wrapper."

Okay. Please use the below comment in both patches 2 and 4:

/* Reset the PEX wrapper to bring the link out of L2 */

- Mani

Frank

quoted

Frank

quoted

- Mani

quoted

+	 * LDBG_WE: allows the user to have write access to the PEXDBG[SR] for both setting and
+	 *	    clearing the soft reset on the PEX module.
+	 * LDBG_SR: When SR is set to 1, the PEX module enters soft reset.
+	 */
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	return 0;
+}
+
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
 	.pme_turn_off = ls_pcie_send_turnoff_msg,

@@ -242,6 +290,19 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
 };
 
+static const struct dw_pcie_host_ops ls1043a_pcie_host_ops = {
+	.host_init = ls_pcie_host_init,
+	.pme_turn_off = ls1043a_pcie_send_turnoff_msg,
+};
+
+static const struct ls_pcie_drvdata ls1043a_drvdata = {
+	.pf_lut_off = 0x10000,
+	.pm_support = true,
+	.scfg_support = true,
+	.ops = &ls1043a_pcie_host_ops,
+	.exit_from_l2 = ls1043a_pcie_exit_from_l2,
+};
+
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_lut_off = 0xc0000,
 	.pm_support = true,

@@ -252,7 +313,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
 	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
 	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
-	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
+	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
 	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },

-- 
2.34.1

-- 
மணிவண்ணன் சதாசிவம்

-- 
மணிவண்ணன் சதாசிவம்