Re: [PATCH] ASoC: fsl_xcvr: refine the requested phy clock frequency
From: Iuliana Prodan <hidden>
Date: 2023-11-23 09:06:43
Also in:
alsa-devel, lkml
On 11/23/2023 3:14 AM, Shengjiu Wang wrote:
As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.
The relation of phy clock is:
sai_pll_ref_sel
sai_pll
sai_pll_bypass
sai_pll_out
sai_pll_out_div2
earc_phy_cg
Signed-off-by: Shengjiu Wang <redacted>Reviewed-by: Iuliana Prodan <redacted> Thanks, Iulia
quoted hunk ↗ jump to hunk
--- sound/soc/fsl/fsl_xcvr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index 77f8e2394bf9..f0fb33d719c2 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c@@ -358,7 +358,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq) struct device *dev = &xcvr->pdev->dev; int ret; - freq = xcvr->soc_data->spdif_only ? freq / 10 : freq; + freq = xcvr->soc_data->spdif_only ? freq / 5 : freq; clk_disable_unprepare(xcvr->phy_clk); ret = clk_set_rate(xcvr->phy_clk, freq); if (ret < 0) {@@ -409,7 +409,7 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream, bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; u32 m_ctl = 0, v_ctl = 0; u32 r = substream->runtime->rate, ch = substream->runtime->channels; - u32 fout = 32 * r * ch * 10 * 2; + u32 fout = 32 * r * ch * 10; int ret = 0; switch (xcvr->mode) {