Hi Christophe,

On 7/31/23 22:21, Christophe Leroy wrote:

Le 24/07/2023 à 08:33, Randy Dunlap a écrit :

quoted

Reconcile devices.txt with serial/ucc_uart.c regarding device number
assignments. ucc_uart.c supports 4 ports and uses minor devnums
46-49, so update devices.txt with that info.
Then update ucc_uart.c's reference to the location of the devices.txt
list in the kernel source tree.

Devices ttyCPM* belong to cpm_uart driver. As explained in the comment 
you have modified in UCC uart driver, UCC uart borrows those devices and 
shall not be considered as the reference. But the lines you modify in 
device.txt doesn't mention QE UCC, it mentions CPM SCC and CPM SMC.

CPM uart driver supports up to 6 ports (4 SCC and 2 SMC).

Thank you for replying.

Does this mean that the patch should be reverted?

On one of my boards which has a powerpc mpc866 CPU, I have:

[    2.393872] ff000a80.serial: ttyCPM0 at MMIO 0xfff00a80 (irq = 19, 
base_baud = 8250000) is a CPM UART
[    2.411899] ff000a90.serial: ttyCPM1 at MMIO 0xfff00a90 (irq = 20, 
base_baud = 8250000) is a CPM UART
[    2.430352] ff000a00.serial: ttyCPM2 at MMIO 0xfff00a00 (irq = 30, 
base_baud = 8250000) is a CPM UART
[    2.448944] ff000a20.serial: ttyCPM3 at MMIO 0xfff00a20 (irq = 29, 
base_baud = 8250000) is a CPM UART
[    2.467435] ff000a40.serial: ttyCPM4 at MMIO 0xfff00a40 (irq = 28, 
base_baud = 8250000) is a CPM UART
[    2.485924] ff000a60.serial: ttyCPM5 at MMIO 0xfff00a60 (irq = 27, 
base_baud = 8250000) is a CPM UART

# ll /dev/ttyCPM*
crw-------    1 root     root      204,  46 Jan  1 01:01 /dev/ttyCPM0
crw-------    1 root     root      204,  47 Jan  1 01:00 /dev/ttyCPM1
crw-------    1 root     root      204,  48 Jan  1 01:00 /dev/ttyCPM2
crw-------    1 root     root      204,  49 Jan  1 01:00 /dev/ttyCPM3
crw-------    1 root     root      204,  50 Jan  1 01:00 /dev/ttyCPM4
crw-------    1 root     root      204,  51 Jan  1 01:00 /dev/ttyCPM5

I don't see minors 50-51 allocated in devices.txt for use by this device/driver.
Am I overlooking that allocation somewhere?

Thanks for your help.

# cat /proc/tty/drivers
/dev/tty             /dev/tty        5       0 system:/dev/tty
/dev/console         /dev/console    5       1 system:console
/dev/ptmx            /dev/ptmx       5       2 system
ttyCPM               /dev/ttyCPM   204 46-51 serial
pty_slave            /dev/pts      136 0-1048575 pty:slave
pty_master           /dev/ptm      128 0-1048575 pty:master
pty_slave            /dev/ttyp       3 0-4 pty:slave
pty_master           /dev/pty        2 0-4 pty:master

Christophe

quoted

Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <redacted>
Cc: Timur Tabi <timur@kernel.org>
Cc: Kumar Gala <redacted>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-serial@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
  Documentation/admin-guide/devices.txt |    2 +-
  drivers/tty/serial/ucc_uart.c         |    2 +-
  2 files changed, 2 insertions(+), 2 deletions(-)

diff -- a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c

--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c

@@ -59,7 +59,7 @@ static int firmware_loaded;
  /* #define LOOPBACK */
  
  /* The major and minor device numbers are defined in
- * http://www.lanana.org/docs/device-list/devices-2.6+.txt.  For the QE
+ * Documentation/admin-guide/devices.txt.  For the QE
   * UART, we have major number 204 and minor numbers 46 - 49, which are the
   * same as for the CPM2.  This decision was made because no Freescale part
   * has both a CPM and a QE.

diff -- a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt

--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt

@@ -2691,7 +2691,7 @@
  		 45 = /dev/ttyMM1		Marvell MPSC - port 1 (obsolete unused)
  		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
  		    ...
-		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5
+		 49 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 3
  		 50 = /dev/ttyIOC0		Altix serial card
  		    ...
  		 81 = /dev/ttyIOC31		Altix serial card

-- 
~Randy