Re: [PATCH v3 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller
From: Herve Codina <herve.codina@bootlin.com>
Date: 2023-01-23 11:37:03
Also in:
alsa-devel, linux-arm-kernel, linux-devicetree, lkml
Hi Rob, On Tue, 17 Jan 2023 08:55:29 -0600 Rob Herring [off-list ref] wrote:
On Fri, Jan 13, 2023 at 11:37:50AM +0100, Herve Codina wrote:quoted
Add support for the time slot assigner (TSA) available in some PowerQUICC SoC such as MPC885 or MPC866.An odd line wrap length...
Will be changed in v4.
quoted
Signed-off-by: Herve Codina <herve.codina@bootlin.com> --- .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml | 260 ++++++++++++++++++ include/dt-bindings/soc/fsl,tsa.h | 13 + 2 files changed, 273 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml create mode 100644 include/dt-bindings/soc/fsl,tsa.hdiff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml new file mode 100644 index 000000000000..eb17b6119abd --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml@@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM Time-slot assigner (TSA) controller + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: |Don't need '|' if no formatting.
Will be changed in v4.
quoted
+ The TSA is the time-slot assigner that can be found on some + PowerQUICC SoC. + Its purpose is to route some TDM time-slots to other internal + serial controllers.Wrap at 80.
Will be fixed in v4.
quoted
+ +properties: + compatible: + items: + - enum: + - fsl,mpc885-tsa + - fsl,mpc866-tsa + - const: fsl,cpm1-tsa + + reg: + items: + - description: SI (Serial Interface) register base + - description: SI RAM base + + reg-names: + items: + - const: si_regs + - const: si_ram + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^tdm@[0-1]$': + description: + The TDM managed by this controller + type: objectadditionalProperties: false
Will be added in v4.
quoted
+ + properties: + reg: + minimum: 0 + maximum: 1 + description: + The TDM number for this TDM, 0 for TDMa and 1 for TDMb + + fsl,common-rxtx-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: + The hardware can use four dedicated pins for Tx clock, + Tx sync, Rx clock and Rx sync or use only two pins, + Tx/Rx clock and Rx/Rx sync. + Without the 'fsl,common-rxtx-pins' property, the four + pins are used. With the 'fsl,common-rxtx-pins' property, + two pins are used. + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + + fsl,mode:'mode' is a bit vague. It's already used as well which can be a problem if there are differing types. (There's not in this case)
What do you think about:
fsl,diagnostic-mode:
$ref: /schemas/types.yaml#/definitions/string
enum: [disabled, echo, internal-loopback, control-loopback]
default: disabled
description: |
The diagnostic mode can be used to diagnose some communication issues.
It should not be present (or set to 'disabled') when diagnostic is not
needed.
Diagnostic mode:
- disabled:
Diagnostic disabled (ie. normal operation)
- echo:
Automatic echo. Rx data is resent on Tx
- internal-loopback:
The TDM transmitter is connected to the receiver.
Data appears on Tx pin.
- control-loopback:
The TDM transmitter is connected to the receiver.
The Tx pin is disconnected.
quoted
+ $ref: /schemas/types.yaml#/definitions/string + enum: [normal, echo, internal-loopback, control-loopback] + default: normal + description: | + Operational mode: + - normal: + Normal operation + - echo: + Automatic echo. Rx data is resent on Tx + - internal-loopback: + The TDM transmitter is connected to the receiver. + Data appears on Tx pin. + - control-loopback: + The TDM transmitter is connected to the receiver. + The Tx pin is disconnected. + + fsl,rx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Receive frame sync delay in number of bits. + Indicates the delay between the Rx sync and the first bit of the + Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,tx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Transmit frame sync delay in number of bits. + Indicates the delay between the Tx sync and the first bit of the + Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Data is sent on falling edge of the clock (and received on the + rising edge). + If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + fsl,fsync-rising-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Frame sync pulses are sampled with the rising edge of the channel + clock. If 'fsync-rising-edge' is not present, pulses are sample + with e falling edge. + + fsl,double-speed-clock: + $ref: /schemas/types.yaml#/definitions/flag + description: + The channel clock is twice the data rate. + + fsl,tx-ts-routes: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tupple that indicates the Tx time-slots routes. + tx_ts_routes = + < 2 0 >, /* The first 2 time slots are not used */ + < 3 1 >, /* The next 3 ones are route to SCC2 */ + < 4 0 >, /* The next 4 ones are not used */ + < 2 2 >; /* The nest 2 ones are route to SCC3 */ + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The source serial interface (dt-bindings/soc/fsl,tsa.h + defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + fsl,rx-ts-routes: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tupple that indicates the Rx time-slots routes. + tx_ts_routes = + < 2 0 >, /* The first 2 time slots are not used */ + < 3 1 >, /* The next 3 ones are route from SCC2 */ + < 4 0 >, /* The next 4 ones are not used */ + < 2 2 >; /* The nest 2 ones are route from SCC3 */ + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The destination serial interface (dt-bindings/soc/fsl,tsa.h + defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + allOf: + # If fsl,common-rxtx-pins is present, only 2 clocks are needed. + # Else, the 4 clocks must be present. + - if: + required: + - fsl,common-rxtx-pins + then: + properties: + clocks: + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + clock-names: + items: + - const: l1rsync + - const: l1rclk + else: + properties: + clocks: + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + - description: External clock connected to L1TSYNC pin + - description: External clock connected to L1TCLK pin + clock-names: + items: + - const: l1rsync + - const: l1rclk + - const: l1tsync + - const: l1tclkAs the names are the same, just the length varies between 2 or 4, move all this to the main definition and here just put constraints on the length.
Ok, will be done in v4.
quoted
+ + required: + - reg + - clocks + - clock-names + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/fsl,tsa.h> + + tsa@ae0 { + compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa"; + reg = <0xae0 0x10>, + <0xc00 0x200>; + reg-names = "si_regs", "si_ram"; + + #address-cells = <1>; + #size-cells = <0>; + + tdm@0 { + /* TDMa */ + reg = <0>; + + clocks = <&clk_l1rsynca>, <&clk_l1rclka>; + clock-names = "l1rsync", "l1rclk"; + + fsl,common-rxtx-pins; + fsl,fsync-rising-edge; + + fsl,tx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + + fsl,rx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + }; + };diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h new file mode 100644 index 000000000000..2cc44e867dbe --- /dev/null +++ b/include/dt-bindings/soc/fsl,tsa.h@@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ + +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H +#define __DT_BINDINGS_SOC_FSL_TSA_H + +#define FSL_CPM_TSA_NU 0 /* Pseuso Cell Id for not used item */ +#define FSL_CPM_TSA_SCC2 1 +#define FSL_CPM_TSA_SCC3 2 +#define FSL_CPM_TSA_SCC4 3 +#define FSL_CPM_TSA_SMC1 4 +#define FSL_CPM_TSA_SMC2 5 + +#endif-- 2.38.1
Thanks for the review, Hervé -- Hervé Codina, Bootlin Embedded Linux and Kernel engineering https://bootlin.com