Thread (9 messages) 9 messages, 4 authors, 2022-07-29

[PATCH v5 0/4] Extending NMI watchdog during LPM

flat view
STALE1556d LANDED

From: Laurent Dufour <hidden>
Date: 2022-07-13 15:49:27
Also in: linux-watchdog, lkml
Subsystem: documentation, linux for powerpc (32-bit and 64-bit), the rest · Maintainers: Jonathan Corbet, Madhavan Srinivasan, Linus Torvalds

Status: Landed in mainline.

Revision v5 (4 revisions archived).

Revisions (4)
  1. v2
  2. v3 [diff against previous]
  3. v4 [diff against previous]
  4. v5 current [diff against previous]
When a partition is transferred, once it arrives at the destination node,
the partition is active but much of its memory must be transferred from the
start node.

It depends on the activity in the partition, but the more CPU the partition
has, the more memory to be transferred is likely to be. This causes latency
when accessing pages that need to be transferred, and often, for large
partitions, it triggers the NMI watchdog.

The NMI watchdog causes the CPU stack to dump where it appears to be
stuck. In this case, it does not bring much information since it can happen
during any memory access of the kernel.

In addition, the NMI interrupt mechanism is not secure and can generate a
dump system in the event that the interruption is taken while MSR[RI]=0.

Depending on the LPAR size and load, it may be interesting to extend the
NMI watchdog timer during the LPM.

That's configurable through sysctl with the new introduced variable
(specific to powerpc) nmi_watchdog_factor. This value represents the
percentage added to watchdog_tresh to set the NMI watchdog timeout during a
LPM.

Changes in V5 (no functional changes in this version):
Patch 4/4:
 - fixing typos and grammar issues reported by Randy.
 - Renaming sysctl value from nmi_watchdog_factor to nmi_wd_lpm_factor as
   per Nick request

V4:
https://lore.kernel.org/linuxppc-dev/20220712143202.23144-1-ldufour@linux.ibm.com/ (local)

Laurent Dufour (4):
  powerpc/mobility: wait for memory transfer to complete
  watchdog: export lockup_detector_reconfigure
  powerpc/watchdog: introduce a NMI watchdog's factor
  pseries/mobility: set NMI watchdog factor during an LPM

 Documentation/admin-guide/sysctl/kernel.rst | 12 +++
 arch/powerpc/include/asm/nmi.h              |  2 +
 arch/powerpc/kernel/watchdog.c              | 21 ++++-
 arch/powerpc/platforms/pseries/mobility.c   | 91 ++++++++++++++++++++-
 include/linux/nmi.h                         |  2 +
 kernel/watchdog.c                           | 21 +++--
 6 files changed, 141 insertions(+), 8 deletions(-)

-- 
2.37.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help