[+CC Adding Jens and Damien to get their opinion about the problem at hand]
Hello Jens and Damien,
Sorry to bother both of you, but we are having a problem that most
definitely requires someone with an extensive expertise in storage,
as per the quoted message from Christian below:
quoted
quoted
The Nemo board [1] doesn't recognize any ATA disks with the pci-v5.16
updates [2].
Error messages:
ata4.00: gc timeout cmd 0xec
ata4.00: failed to IDENTIFY (I/O error, error_mask=0x4)
ata1.00: gc timeout cmd 0xec
ata1.00: failed to IDENTIFY (I/O error, error_mask=0x4)
ata3.00: gc timeout cmd 0xec
ata3.00: failed to IDENTIFY (I/O error, error_mask=0x4)
The error message is also not very detailed and we aren't really sure what
the issue coming from the PCI sub-system might be causing or leading to
this.
quoted
quoted
I was able to revert the new pci-v5.16 updates [2]. After a new compiling,
the kernel recognize all ATA disks correctly.
Could you please check the pci-v5.16 updates [2]?
Please find attached the kernel config.
Thanks,
Christian
[1] https://en.wikipedia.org/wiki/AmigaOne_X1000
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0c5c62ddf88c34bc83b66e4ac9beb2bb0e1887d4
Sorry for the breakage, and thank you very much for the report. Can
you please collect the complete dmesg logs before and after the
pci-v5.16 changes and the "sudo lspci -vv" output from before the
changes?
You can attach them at https://bugzilla.kernel.org if you don't have
a better place to put them.
You could attach the kernel config there, too, since it didn't make it
to the mailing list (vger may discard them -- see
http://vger.kernel.org/majordomo-info.html).
Bjorn and I looked at which commits that went with a recent Pull Request
from us might be causing this, but we are a little bit at loss, and were
hoping that you could give us a hand in troubleshooting this.
Thank you in advance!
Krzysztof