[PATCH] powerpc/32s: Allocate one 256k IBAT instead of two consecutives 128k IBATs

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE1724d LANDED

Landed in mainline as 37eb7ca91b69 on 2021-12-09.

3 messages, 3 authors, 2021-12-15 · open the first message on its own page

[PATCH] powerpc/32s: Allocate one 256k IBAT instead of two consecutives 128k IBATs

From: Christophe Leroy <hidden>
Date: 2021-11-26 12:42:51

Today we have the following IBATs allocated:

	---[ Instruction Block Address Translation ]---
	0: 0xc0000000-0xc03fffff 0x00000000         4M Kernel   x     m
	1: 0xc0400000-0xc05fffff 0x00400000         2M Kernel   x     m
	2: 0xc0600000-0xc06fffff 0x00600000         1M Kernel   x     m
	3: 0xc0700000-0xc077ffff 0x00700000       512K Kernel   x     m
	4: 0xc0780000-0xc079ffff 0x00780000       128K Kernel   x     m
	5: 0xc07a0000-0xc07bffff 0x007a0000       128K Kernel   x     m
	6:         -
	7:         -

The two 128K should be a single 256K instead.

When _etext is not aligned to 128Kbytes, the system will allocate
all necessary BATs to the lower 128Kbytes boundary, then allocate
an additional 128Kbytes BAT for the remaining block.

Instead, align the top to 128Kbytes so that the function directly
allocates a 256Mbytes last block:

	---[ Instruction Block Address Translation ]---
	0: 0xc0000000-0xc03fffff 0x00000000         4M Kernel   x     m
	1: 0xc0400000-0xc05fffff 0x00400000         2M Kernel   x     m
	2: 0xc0600000-0xc06fffff 0x00600000         1M Kernel   x     m
	3: 0xc0700000-0xc077ffff 0x00700000       512K Kernel   x     m
	4: 0xc0780000-0xc07bffff 0x00780000       256K Kernel   x     m
	5:         -
	6:         -
	7:         -

Signed-off-by: Christophe Leroy <redacted>
---
 arch/powerpc/mm/book3s32/mmu.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
index 27061583a010..33ab63d56435 100644
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -196,18 +196,17 @@ void mmu_mark_initmem_nx(void)
 	int nb = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4;
 	int i;
 	unsigned long base = (unsigned long)_stext - PAGE_OFFSET;
-	unsigned long top = (unsigned long)_etext - PAGE_OFFSET;
+	unsigned long top = ALIGN((unsigned long)_etext - PAGE_OFFSET, SZ_128K);
 	unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET;
 	unsigned long size;
 
-	for (i = 0; i < nb - 1 && base < top && top - base > (128 << 10);) {
+	for (i = 0; i < nb - 1 && base < top;) {
 		size = block_size(base, top);
 		setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT);
 		base += size;
 	}
 	if (base < top) {
 		size = block_size(base, top);
-		size = max(size, 128UL << 10);
 		if ((top - base) > size) {
 			size <<= 1;
 			if (strict_kernel_rwx_enabled() && base + size > border)
-- 
2.33.1

Re: [PATCH] powerpc/32s: Allocate one 256k IBAT instead of two consecutives 128k IBATs

From: Michael Ellerman <mpe@ellerman.id.au>
Date: 2021-12-03 03:55:16

Christophe Leroy [off-list ref] writes:
Today we have the following IBATs allocated:

	---[ Instruction Block Address Translation ]---
	0: 0xc0000000-0xc03fffff 0x00000000         4M Kernel   x     m
	1: 0xc0400000-0xc05fffff 0x00400000         2M Kernel   x     m
	2: 0xc0600000-0xc06fffff 0x00600000         1M Kernel   x     m
	3: 0xc0700000-0xc077ffff 0x00700000       512K Kernel   x     m
	4: 0xc0780000-0xc079ffff 0x00780000       128K Kernel   x     m
	5: 0xc07a0000-0xc07bffff 0x007a0000       128K Kernel   x     m
	6:         -
	7:         -

The two 128K should be a single 256K instead.

When _etext is not aligned to 128Kbytes, the system will allocate
all necessary BATs to the lower 128Kbytes boundary, then allocate
an additional 128Kbytes BAT for the remaining block.

Instead, align the top to 128Kbytes so that the function directly
allocates a 256Mbytes last block:
                 ^

I think that's meant to be 256Kbytes, I changed it when committing.
	---[ Instruction Block Address Translation ]---
	0: 0xc0000000-0xc03fffff 0x00000000         4M Kernel   x     m
	1: 0xc0400000-0xc05fffff 0x00400000         2M Kernel   x     m
	2: 0xc0600000-0xc06fffff 0x00600000         1M Kernel   x     m
	3: 0xc0700000-0xc077ffff 0x00700000       512K Kernel   x     m
	4: 0xc0780000-0xc07bffff 0x00780000       256K Kernel   x     m
	5:         -
	6:         -
	7:         -

Signed-off-by: Christophe Leroy <redacted>

cheers

Re: [PATCH] powerpc/32s: Allocate one 256k IBAT instead of two consecutives 128k IBATs

From: Michael Ellerman <hidden>
Date: 2021-12-15 00:26:54

On Fri, 26 Nov 2021 13:40:35 +0100, Christophe Leroy wrote:
Today we have the following IBATs allocated:

	---[ Instruction Block Address Translation ]---
	0: 0xc0000000-0xc03fffff 0x00000000         4M Kernel   x     m
	1: 0xc0400000-0xc05fffff 0x00400000         2M Kernel   x     m
	2: 0xc0600000-0xc06fffff 0x00600000         1M Kernel   x     m
	3: 0xc0700000-0xc077ffff 0x00700000       512K Kernel   x     m
	4: 0xc0780000-0xc079ffff 0x00780000       128K Kernel   x     m
	5: 0xc07a0000-0xc07bffff 0x007a0000       128K Kernel   x     m
	6:         -
	7:         -

[...]
Applied to powerpc/next.

[1/1] powerpc/32s: Allocate one 256k IBAT instead of two consecutives 128k IBATs
      https://git.kernel.org/powerpc/c/37eb7ca91b692e8e49e7dd50158349a6c8fb5b09

cheers
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help