Re: ppc32 doesn't boot when linkaddr=0x00900000
From: Christophe Leroy <hidden>
Date: 2021-09-27 06:54:05
Hi, Le 25/09/2021 à 11:49, cp a écrit :
hi I am new to this list. Hope this is the right place to ask. I am working with a PPC405GP board, and as far as I understand, the support for ppc40x platforms like Acadia and Walnut were dropped with kernel 5.8.0, so this seems like a pretty straightforward question, but extensive experiments from kernel 4.11 to kernel 5.7.19 haven't shown a really clear, up-to-date answer. In k4.11 .. k5.7.19, when the kernel size is bigger than 8 MB, the final kernel doesn't boot but rather arch/powerpc/boot/main.c dies before the first message from the kernel shows up. Why?
...
The following is the same kernel, compiled with the same .config, but with two link_addr values A) with link_addr=0x0080.0000
...
Finalizing device tree... flat tree at 0xf23b80
...
B) with link_addr=0x0080.0000
...
Finalizing device tree... flat tree at 0x1023b80
...
Any ideas? I am lost ...
As you can see above, when it works you have "flat tree at 0xf23b80", when it fails you have "flat tree at 0x1023b80". The reason for the failure is likely that ppc 40x only maps 16 Mbytes at startup, so when your device tree is outside that map if fails. See https://elixir.bootlin.com/linux/v5.15-rc2/source/arch/powerpc/kernel/head_40x.S#L656 Called from https://elixir.bootlin.com/linux/v5.15-rc2/source/arch/powerpc/kernel/head_40x.S#L56 As you can see it maps one 16Mbytes page. Allthough I'm not an expert on 40x I think it should be easy to map a second 16Mbytes page to get 32Mbytes mapped. I will send a patch later today for you to test. Christophe