RFC: https://lkml.org/lkml/2021/6/4/791
PATCH v1: https://lkml.org/lkml/2021/6/16/805
PATCH v2: https://lkml.org/lkml/2021/7/6/138
PATCH v3: https://lkml.org/lkml/2021/7/12/2799
PATCH v4: https://lkml.org/lkml/2021/7/16/532

Changelog v4 --> v5
Based on comments from Fabiano
1. Cleaned up unused/redundant headers
2. Make "add_attr_group" use MAX_ATTRS instead of paramterizing "len"
3. Cleanup previous "pgs[idx].pg.attrs" allocations on failiure
4. Replaced strlen call with strnlen
5. Cleanup of pgs structures for "num_attrs" instead of "MAX_ATTRS"

Also, have implemented a POC using this interface for the powerpc-utils'
ppc64_cpu --frequency command-line tool to utilize this information
in userspace.
The POC for the new interface has been hosted here:
https://github.com/pratiksampat/powerpc-utils/tree/H_GET_ENERGY_SCALE_INFO_v2

Sample output from the powerpc-utils tool is as follows:

# ppc64_cpu --frequency
Power and Performance Mode: XXXX
Idle Power Saver Status   : XXXX
Processor Folding Status  : XXXX --> Printed if Idle power save status is supported

Platform reported frequencies --> Frequencies reported from the platform's H_CALL i.e PAPR interface
min        :    NNNN GHz
max        :    NNNN GHz
static     :    NNNN GHz

Tool Computed frequencies
min        :    NNNN GHz (cpu XX)
max        :    NNNN GHz (cpu XX)
avg        :    NNNN GHz

Pratik R. Sampat (1):
  powerpc/pseries: Interface to represent PAPR firmware attributes

 .../sysfs-firmware-papr-energy-scale-info     |  26 ++
 arch/powerpc/include/asm/hvcall.h             |  24 +-
 arch/powerpc/kvm/trace_hv.h                   |   1 +
 arch/powerpc/platforms/pseries/Makefile       |   3 +-
 .../pseries/papr_platform_attributes.c        | 317 ++++++++++++++++++
 5 files changed, 369 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
 create mode 100644 arch/powerpc/platforms/pseries/papr_platform_attributes.c

-- 
2.31.1