Re: [PATCH v2 1/1] powerpc/iommu: Enable remaining IOMMU Pagesizes present in LoPAR

Alexey Kardashevskiy [off-list ref] writes:

On 08/04/2021 15:37, Michael Ellerman wrote:

quoted

Leonardo Bras [off-list ref] writes:

quoted

According to LoPAR, ibm,query-pe-dma-window output named "IO Page Sizes"
will let the OS know all possible pagesizes that can be used for creating a
new DDW.

Currently Linux will only try using 3 of the 8 available options:
4K, 64K and 16M. According to LoPAR, Hypervisor may also offer 32M, 64M,
128M, 256M and 16G.

Do we know of any hardware & hypervisor combination that will actually
give us bigger pages?

On P8 16MB host pages and 16MB hardware iommu pages worked.

On P9, VM's 16MB IOMMU pages worked on top of 2MB host pages + 2MB 
hardware IOMMU pages.

The current code already tries 16MB though.

I'm wondering if we're going to ask for larger sizes that have never
been tested and possibly expose bugs. But it sounds like this is mainly
targeted at future platforms.

quoted

quoted

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 9fc5217f0c8e..6cda1c92597d 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c

@@ -53,6 +53,20 @@ enum {
  	DDW_EXT_QUERY_OUT_SIZE = 2
  };

A comment saying where the values come from would be good.

quoted

+#define QUERY_DDW_PGSIZE_4K	0x01
+#define QUERY_DDW_PGSIZE_64K	0x02
+#define QUERY_DDW_PGSIZE_16M	0x04
+#define QUERY_DDW_PGSIZE_32M	0x08
+#define QUERY_DDW_PGSIZE_64M	0x10
+#define QUERY_DDW_PGSIZE_128M	0x20
+#define QUERY_DDW_PGSIZE_256M	0x40
+#define QUERY_DDW_PGSIZE_16G	0x80

I'm not sure the #defines really gain us much vs just putting the
literal values in the array below?

Then someone says "uuuuu magic values" :) I do not mind either way. Thanks,

Yeah that's true. But #defining them doesn't make them less magic, if
you only use them in one place :)

cheers