Re: [PATCH v17 05/10] powerpc: Move ima buffer fields to struct kimage

The fields ima_buffer_addr and ima_buffer_size in "struct kimage_arch"
for powerpc are used to carry forward the IMA measurement list across
kexec system call.  These fields are not architecture specific, but are
currently limited to powerpc.

arch_ima_add_kexec_buffer() defined in "arch/powerpc/kexec/ima.c"
sets ima_buffer_addr and ima_buffer_size for the kexec system call.
This function does not have architecture specific code, but is
currently limited to powerpc.

Move ima_buffer_addr and ima_buffer_size to "struct kimage".
Rename arch_ima_add_kexec_buffer() to of_ima_add_kexec_buffer()
and move it in drivers/of/kexec.c.

Co-developed-by: Prakhar Srivastava <redacted>
Signed-off-by: Prakhar Srivastava <redacted>
Signed-off-by: Lakshmi Ramasubramanian <redacted>
Suggested-by: Will Deacon <will@kernel.org>
---
 arch/powerpc/include/asm/ima.h     |  3 ---
 arch/powerpc/include/asm/kexec.h   |  5 -----
 arch/powerpc/kexec/ima.c           | 29 ++++++-----------------------
 drivers/of/kexec.c                 | 23 +++++++++++++++++++++++
 include/linux/kexec.h              |  3 +++
 include/linux/of.h                 |  5 +++++
 security/integrity/ima/ima_kexec.c |  3 ++-
 7 files changed, 39 insertions(+), 32 deletions(-)

diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h
index ead488cf3981..51f64fd06c19 100644
--- a/arch/powerpc/include/asm/ima.h
+++ b/arch/powerpc/include/asm/ima.h

@@ -14,9 +14,6 @@ static inline void remove_ima_buffer(void *fdt, int chosen_node) {}
 #endif
 
 #ifdef CONFIG_IMA_KEXEC
-int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
-			      size_t size);
-
 int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node);
 #else
 static inline int setup_ima_buffer(const struct kimage *image, void *fdt,

diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index bdd0ddb9ac4d..ecf88533d6b4 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h

@@ -112,11 +112,6 @@ struct kimage_arch {
 	unsigned long elf_headers_sz;
 	void *elf_headers;
 	void *fdt;
-
-#ifdef CONFIG_IMA_KEXEC
-	phys_addr_t ima_buffer_addr;
-	size_t ima_buffer_size;
-#endif
 };
 
 char *setup_kdump_cmdline(struct kimage *image, char *cmdline,

diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
index 720e50e490b6..ed38125e2f87 100644
--- a/arch/powerpc/kexec/ima.c
+++ b/arch/powerpc/kexec/ima.c

@@ -128,23 +128,6 @@ void remove_ima_buffer(void *fdt, int chosen_node)
 }
 
 #ifdef CONFIG_IMA_KEXEC
-/**
- * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer
- *
- * Architectures should use this function to pass on the IMA buffer
- * information to the next kernel.
- *
- * Return: 0 on success, negative errno on error.
- */
-int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
-			      size_t size)
-{
-	image->arch.ima_buffer_addr = load_addr;
-	image->arch.ima_buffer_size = size;
-
-	return 0;
-}
-
 static int write_number(void *p, u64 value, int cells)
 {
 	if (cells == 1) {

@@ -180,7 +163,7 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
 	u8 value[16];
 
 	remove_ima_buffer(fdt, chosen_node);
-	if (!image->arch.ima_buffer_size)
+	if (!image->ima_buffer_size)
 		return 0;
 
 	ret = get_addr_size_cells(&addr_cells, &size_cells);

@@ -192,11 +175,11 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
 	if (entry_size > sizeof(value))
 		return -EINVAL;
 
-	ret = write_number(value, image->arch.ima_buffer_addr, addr_cells);
+	ret = write_number(value, image->ima_buffer_addr, addr_cells);
 	if (ret)
 		return ret;
 
-	ret = write_number(value + 4 * addr_cells, image->arch.ima_buffer_size,
+	ret = write_number(value + 4 * addr_cells, image->ima_buffer_size,
 			   size_cells);
 	if (ret)
 		return ret;

@@ -206,13 +189,13 @@ int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
 	if (ret < 0)
 		return -EINVAL;
 
-	ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr,
-			      image->arch.ima_buffer_size);
+	ret = fdt_add_mem_rsv(fdt, image->ima_buffer_addr,
+			      image->ima_buffer_size);
 	if (ret)
 		return -EINVAL;
 
 	pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n",
-		 image->arch.ima_buffer_addr, image->arch.ima_buffer_size);
+		 image->ima_buffer_addr, image->ima_buffer_size);
 
 	return 0;
 }

diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c
index 469e09613cdd..9f33d215b9f2 100644
--- a/drivers/of/kexec.c
+++ b/drivers/of/kexec.c

@@ -63,6 +63,29 @@ static int fdt_find_and_del_mem_rsv(void *fdt, unsigned long start, unsigned lon
 	return -ENOENT;
 }
 
+#ifdef CONFIG_IMA_KEXEC
+/**
+ * of_ima_add_kexec_buffer - Add IMA buffer for next kernel
+ *
+ * @image: kimage struct to set IMA buffer data
+ * @load_addr: Starting address where IMA buffer is loaded at
+ * @size: Number of bytes in the IMA buffer
+ *
+ * Use this function to pass on the IMA buffer information to
+ * the next kernel across kexec system call.
+ *
+ * Return: 0 on success, negative errno on error.
+ */
+int of_ima_add_kexec_buffer(struct kimage *image,
+			    unsigned long load_addr, size_t size)
+{
+	image->ima_buffer_addr = load_addr;
+	image->ima_buffer_size = size;
+