[PATCH v3 devicetree 1/2] powerpc: dts: t1040: add bindings for Seville Ethernet switch
flat view
STALE2216d
SUPERSEDED: 1 (0M)
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: 2020-10-01 13:20:49
Also in:
linux-devicetree, lkml, netdev
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Linus Torvalds
Status: Superseded by v4 (posted 2020-10-02). [go to v4]
Revision v3 (3 revisions archived); 1 review trailer.
Revisions (3)
- v2
- v3 current [diff against previous]
- v4 [diff against previous]
Add the description of the embedded L2 switch inside the SoC dtsi file for NXP T1040. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maxim Kochetkov <redacted> --- Changes in v3: Added definition for frame extraction interrupt, even if the driver doesn't use it at the moment. Changes in v2: Make switch node disabled by default. arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 78 +++++++++++++++++++++ 1 file changed, 78 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 315d0557eefc..f58eb820eb5e 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi@@ -628,6 +628,84 @@ mdio@fd000 { status = "disabled"; }; }; + + seville_switch: ethernet-switch@800000 { + compatible = "mscc,vsc9953-switch"; + reg = <0x800000 0x290000>; + interrupts = <26 2 0 0>; + interrupt-names = "xtr"; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + seville_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + seville_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + seville_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + seville_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + seville_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + seville_port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + seville_port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + seville_port7: port@7 { + reg = <7>; + status = "disabled"; + }; + + seville_port8: port@8 { + reg = <8>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + seville_port9: port@9 { + reg = <9>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + }; + }; }; &qe {
--
2.25.1