This patch adds an DTSI-File that can be used by various device-tree
files for APM82181-based devices.

Some of the nodes (like UART, PCIE, SATA) are used by the uboot and
need to stick with the naming-conventions of the old times'.
I've added comments whenever this was the case.

Signed-off-by: Chris Blake <redacted>
Signed-off-by: Christian Lamparter <redacted>
---
rfc v1 -> v2:
	- removed PKA (this CryptoPU will need driver)
	- stick with compatibles, nodes, ... from either
	  Bluestone (APM82181) or Canyonlands (PPC460EX).
	- add labels for NAND and NOR to help with access.
v2 -> v3:
	- nodename of pciex@d.... was changed to pcie@d..
	  due to upstream patch.
	- use simple-bus on the ebc, opb and plb nodes
---
 arch/powerpc/boot/dts/apm82181.dtsi | 466 ++++++++++++++++++++++++++++
 1 file changed, 466 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/apm82181.dtsi

diff --git a/arch/powerpc/boot/dts/apm82181.dtsi b/arch/powerpc/boot/dts/apm82181.dtsi
new file mode 100644
index 000000000000..60283430978d
--- /dev/null
+++ b/arch/powerpc/boot/dts/apm82181.dtsi

@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree template include for various APM82181 boards.
+ *
+ * The SoC is an evolution of the PPC460EX predecessor.
+ * This is why dt-nodes from the canyonlands EBC, OPB, USB,
+ * DMA, SATA, EMAC, ... ended up in here.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tirumala R Marri <tmarri@apm.com>,
+ *	   Christian Lamparter <chunkeey@gmail.com>,
+ *	   Chris Blake <chrisrblake93@gmail.com>
+ */
+
+#include <dt-bindings/dma/dw-dmac.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0; /* needed for BSP u-boot */
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,apm82181";