Le 29/11/2019 à 08:04, Lexi Shao a écrit :
CONFIG_RELOCATABLE and CONFIG_KASAN cannot be enabled at the same time
on ppce500 fsl_booke. All functions called before kasan_early_init()
should be disabled with kasan check. When CONFIG_RELOCATABLE is enabled
on ppce500 fsl_booke, relocate_init() is called before kasan_early_init()
which triggers kasan check and results in boot failure.
Call trace and functions which triggers kasan check(*):
- _start
- set_ivor
- relocate_init(*)
- early_get_first_memblock_info(*)
- of_scan_flat_dt(*)
...
- kasan_early_init
Potential solutions could be 1. implement relocate_init and all its children
function in a seperate file or 2. introduce a global vairable in KASAN, only
enable KASAN check when init is done.
Solution 1 seems uneasy. of_scan_flat_dt() and children are general functions that can't be set aside.
Solution 2 would destroy performance, and would anyway not work with inline instrumentation.
Have you tried moving the call to kasan_early_init() before the call of relocate_init() ?
On other PPC32, kasan_early_init() is the first thing done after activating the MMU. But AFAIU, MMU is always active on BOOKE though.
Christophe
quoted hunk ↗ jump to hunk
Disable KASAN when RELOCATABLE is selected on fsl_booke for now until
it is supported.
Signed-off-by: Lexi Shao <redacted>
---
arch/powerpc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 3e56c9c2f16e..14f3da63c088 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -171,7 +171,7 @@ config PPC
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_HUGE_VMAP if PPC_BOOK3S_64 && PPC_RADIX_MMU
select HAVE_ARCH_JUMP_LABEL
- select HAVE_ARCH_KASAN if PPC32
+ select HAVE_ARCH_KASAN if PPC32 && !(RELOCATABLE && FSL_BOOKE)
select HAVE_ARCH_KGDB
select HAVE_ARCH_MMAP_RND_BITS
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT