Thread (16 messages) 16 messages, 3 authors, 2019-09-27

RE: [v3,3/3] Documentation: dt: binding: fsl: Add 'fsl,ippdexpcr-alt-addr' property

From: Leo Li <hidden>
Date: 2019-09-24 15:58:37
Also in: linux-arm-kernel, linux-devicetree, lkml

quoted hunk ↗ jump to hunk
-----Original Message-----
From: Biwen Li <redacted>
Sent: Monday, September 23, 2019 9:46 PM
To: Leo Li <redacted>; shawnguo@kernel.org;
robh+dt@kernel.org; mark.rutland@arm.com; Ran Wang
[off-list ref]
Cc: linuxppc-dev@lists.ozlabs.org; linux-arm-kernel@lists.infradead.org;
linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; Biwen Li
[off-list ref]
Subject: [v3,3/3] Documentation: dt: binding: fsl: Add 'fsl,ippdexpcr-alt-addr'
property

The 'fsl,ippdexpcr-alt-addr' property is used to handle an errata A-008646 on
LS1021A

Signed-off-by: Biwen Li <redacted>
---
Change in v3:
	- rename property name
	  fsl,rcpm-scfg -> fsl,ippdexpcr-alt-addr

Change in v2:
	- update desc of the property 'fsl,rcpm-scfg'

 Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 14
++++++++++++++
 1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index 5a33619d881d..157dcf6da17c 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -34,6 +34,11 @@ Chassis Version		Example Chips
 Optional properties:
  - little-endian : RCPM register block is Little Endian. Without it RCPM
    will be Big Endian (default case).
+ - fsl,ippdexpcr-alt-addr : Must add the property for SoC LS1021A,
You probably should mention this is related to a hardware issue on LS1021a and only needed on LS1021a.
+   Must include n + 1 entries (n = #fsl,rcpm-wakeup-cells, such as:
+   #fsl,rcpm-wakeup-cells equal to 2, then must include 2 + 1 entries).
#fsl,rcpm-wakeup-cells is the number of IPPDEXPCR registers on an SoC.  However you are defining an offset to scfg registers here.  Why these two are related?  The length here should actually be related to the #address-cells of the soc/.  But since this is only needed for LS1021, you can just make it 3.
quoted hunk ↗ jump to hunk
+   The first entry must be a link to the SCFG device node.
+   The non-first entry must be offset of registers of SCFG.

 Example:
 The RCPM node for T4240:
@@ -43,6 +48,15 @@ The RCPM node for T4240:
 		#fsl,rcpm-wakeup-cells = <2>;
 	};

+The RCPM node for LS1021A:
+	rcpm: rcpm@1ee2140 {
+		compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
+		reg = <0x0 0x1ee2140 0x0 0x8>;
+		#fsl,rcpm-wakeup-cells = <2>;
+		fsl,ippdexpcr-alt-addr = <&scfg 0x0 0x51c>; /*
SCFG_SPARECR8 */
+	};
+
+
 * Freescale RCPM Wakeup Source Device Tree Bindings
 -------------------------------------------
 Required fsl,rcpm-wakeup property should be added to a device node if the
device
--
2.17.1
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help