[PATCH v4 05/11] dt-bindings: pci: layerscape-pci: Add compatible strings for ls1088a and ls2088a
From: Xiaowei Bao <hidden>
Date: 2019-09-24 02:29:46
Also in:
linux-arm-kernel, linux-devicetree, linux-pci, lkml
Subsystem:
open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Add compatible strings for ls1088a and ls2088a. Signed-off-by: Xiaowei Bao <redacted> --- v2: - No change. v3: - Use one valid combination of compatible strings. v4: - Add the comma between the two compatible. Documentation/devicetree/bindings/pci/layerscape-pci.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index e20ceaa..3717e3d 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt@@ -23,6 +23,8 @@ Required properties: "fsl,ls1012a-pcie" EP mode: "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property.
--
2.9.5