-----Original Message-----
From: Andrew Murray <redacted>
Sent: 2019年8月15日 19:54
To: Xiaowei Bao <redacted>
Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
shawnguo@kernel.org; Leo Li [off-list ref]; kishon@ti.com;
lorenzo.pieralisi@arm.com; arnd@arndb.de; gregkh@linuxfoundation.org;
M.h. Lian [off-list ref]; Mingkai Hu [off-list ref];
Roy Zang [off-list ref]; linux-pci@vger.kernel.org;
devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 02/10] PCI: designware-ep: Add the doorbell mode of
MSI-X in EP mode

On Thu, Aug 15, 2019 at 04:37:08PM +0800, Xiaowei Bao wrote:

quoted

Add the doorbell mode of MSI-X in EP mode.

Signed-off-by: Xiaowei Bao <redacted>
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 14 ++++++++++++++
 drivers/pci/controller/dwc/pcie-designware.h    | 14 ++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c

b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 75e2955..e3a7cdf 100644

--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c

@@ -454,6 +454,20 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep

*ep, u8 func_no,

quoted

 	return 0;
 }

+int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8

func_no,

quoted

+				       u16 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 msg_data;
+
+	msg_data = (func_no << PCIE_MSIX_DOORBELL_PF_SHIFT) |
+		   (interrupt_num - 1);
+
+	dw_pcie_writel_dbi(pci, PCIE_MSIX_DOORBELL, msg_data);
+
+	return 0;
+}
+
 int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 			      u16 interrupt_num)

Have I understood correctly that the hardware provides an alternative
mechanism that allows for raising MSI-X interrupts without the bother of
reading the capabilities registers?

Yes, the hardware provide two way to MSI-X, please check the page 492 of 
DWC_pcie_dm_registers_4.30 Menu.
MSIX_DOORBELL_OFF on page 492 0x948 Description: MSI-X Doorbell Register....>

If so is there any good reason to keep dw_pcie_ep_raise_msix_irq? (And thus
use it in dw_plat_pcie_ep_raise_irq also)?

I am not sure, but I think the dw_pcie_ep_raise_msix_irq function is not correct, 
because I think we can't get the MSIX table from the address ep->phys_base + tbl_addr, 
but I also don't know where I can get the correct MSIX table.

quoted

 {

diff --git a/drivers/pci/controller/dwc/pcie-designware.h

b/drivers/pci/controller/dwc/pcie-designware.h
index 2b291e8..cd903e9 100644

--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h

@@ -88,6 +88,11 @@
 #define PCIE_MISC_CONTROL_1_OFF		0x8BC
 #define PCIE_DBI_RO_WR_EN		BIT(0)

+#define PCIE_MSIX_DOORBELL		0x948
+#define PCIE_MSIX_DOORBELL_PF_SHIFT	24
+#define PCIE_MSIX_DOORBELL_VF_SHIFT	16
+#define PCIE_MSIX_DOORBELL_VF_ACTIVE	BIT(15)

The _VF defines are not used, I'd suggest removing them.

In fact, I will add the SRIOV support in this file, the SRIOV feature have verified 
In my board, but I need wait the EP framework SRIOV patch merge, 
so I defined these two macros.

Thanks,

Andrew Murray

quoted

+
 /*
  * iATU Unroll-specific register definitions
  * From 4.80 core version the address translation will be made by
unroll @@ -399,6 +404,8 @@ int dw_pcie_ep_raise_msi_irq(struct

dw_pcie_ep *ep, u8 func_no,

quoted

 			     u8 interrupt_num);
 int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 			     u16 interrupt_num);
+int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8

func_no,

quoted

+				       u16 interrupt_num);
 void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar);
#else  static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep) @@
-431,6 +438,13 @@ static inline int dw_pcie_ep_raise_msix_irq(struct

dw_pcie_ep *ep, u8 func_no,

quoted

 	return 0;
 }

+static inline int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep

*ep,

quoted

+						     u8 func_no,
+						     u16 interrupt_num)
+{
+	return 0;
+}
+
 static inline void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum
pci_barno bar)  {  }
--
2.9.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists
.infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&data=02%

7C0

quoted

1%7Cxiaowei.bao%40nxp.com%7C8489493003bb48a0139d08d721773972%
7C686ea1d

quoted

3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637014668369499298&sd
ata=dyrXB

quoted

avljJBFUSNXW7K%2FRoXvwfWTE%2FoU2KMd1bZkJow%3D&reserved=0