[PATCH v1 22/22] admin-guide: add kdump documentation into it
From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Date: 2019-06-18 21:06:10
Also in:
kexec, linux-arm-kernel, linux-doc, linux-sh, linux-watchdog, lkml
Subsystem:
arm port, arm64 port (aarch64 architecture), chinese documentation, documentation, hewlett packard enterprise ilo nmi watchdog driver, kdump, superh, the rest, watchdog device drivers, x86 architecture (32-bit and 64-bit) · Maintainers:
Russell King, Catalin Marinas, Will Deacon, Alex Shi, Yanteng Si, Jonathan Corbet, Craig Lamparter, Andrew Morton, Baoquan He, Mike Rapoport, Pasha Tatashin, Pratyush Yadav, Yoshinori Sato, Rich Felker, John Paul Adrian Glaubitz, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck, Thomas Gleixner, Ingo Molnar, Borislav Petkov, Dave Hansen
The Kdump documentation describes procedures with admins use
in order to solve issues on their systems.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
Documentation/admin-guide/bug-hunting.rst | 4 ++--
Documentation/admin-guide/index.rst | 1 +
Documentation/{ => admin-guide}/kdump/gdbmacros.txt | 0
Documentation/{ => admin-guide}/kdump/index.rst | 1 -
Documentation/{ => admin-guide}/kdump/kdump.rst | 0
Documentation/{ => admin-guide}/kdump/vmcoreinfo.rst | 0
Documentation/admin-guide/kernel-parameters.txt | 6 +++---
Documentation/powerpc/firmware-assisted-dump.rst | 2 +-
Documentation/translations/zh_CN/oops-tracing.txt | 4 ++--
Documentation/watchdog/hpwdt.rst | 2 +-
MAINTAINERS | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm64/Kconfig | 2 +-
arch/sh/Kconfig | 2 +-
arch/x86/Kconfig | 4 ++--
15 files changed, 16 insertions(+), 16 deletions(-)
rename Documentation/{ => admin-guide}/kdump/gdbmacros.txt (100%)
rename Documentation/{ => admin-guide}/kdump/index.rst (97%)
rename Documentation/{ => admin-guide}/kdump/kdump.rst (100%)
rename Documentation/{ => admin-guide}/kdump/vmcoreinfo.rst (100%)
diff --git a/Documentation/admin-guide/bug-hunting.rst b/Documentation/admin-guide/bug-hunting.rst
index b761aa2a51d2..44b8a4edd348 100644
--- a/Documentation/admin-guide/bug-hunting.rst
+++ b/Documentation/admin-guide/bug-hunting.rst@@ -90,9 +90,9 @@ the disk is not available then you have three options: run a null modem to a second machine and capture the output there using your favourite communication program. Minicom works well. -(3) Use Kdump (see Documentation/kdump/kdump.rst), +(3) Use Kdump (see Documentation/admin-guide/kdump/kdump.rst), extract the kernel ring buffer from old memory with using dmesg - gdbmacro in Documentation/kdump/gdbmacros.txt. + gdbmacro in Documentation/admin-guide/kdump/gdbmacros.txt. Finding the bug's location --------------------------
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index e4f0cb2a02bd..9f6820a7e8f8 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst@@ -39,6 +39,7 @@ problems and bugs in particular. ramoops dynamic-debug-howto init + kdump/index This is the beginning of a section with information of interest to application developers. Documents covering various aspects of the kernel
diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/admin-guide/kdump/gdbmacros.txt
similarity index 100%
rename from Documentation/kdump/gdbmacros.txt
rename to Documentation/admin-guide/kdump/gdbmacros.txt
diff --git a/Documentation/kdump/index.rst b/Documentation/admin-guide/kdump/index.rst
similarity index 97%
rename from Documentation/kdump/index.rst
rename to Documentation/admin-guide/kdump/index.rst
index 2b17fcf6867a..8e2ebd0383cd 100644
--- a/Documentation/kdump/index.rst
+++ b/Documentation/admin-guide/kdump/index.rst@@ -1,4 +1,3 @@ -:orphan: ================================================================ Documentation for Kdump - The kexec-based Crash Dumping Solution
diff --git a/Documentation/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
similarity index 100%
rename from Documentation/kdump/kdump.rst
rename to Documentation/admin-guide/kdump/kdump.rst
diff --git a/Documentation/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst
similarity index 100%
rename from Documentation/kdump/vmcoreinfo.rst
rename to Documentation/admin-guide/kdump/vmcoreinfo.rst
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 69a9e2e66dfb..1f3fc445c78d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt@@ -708,14 +708,14 @@ [KNL, x86_64] select a region under 4G first, and fall back to reserve region above 4G when '@offset' hasn't been specified. - See Documentation/kdump/kdump.rst for further details. + See Documentation/admin-guide/kdump/kdump.rst for further details. crashkernel=range1:size1[,range2:size2,...][@offset] [KNL] Same as above, but depends on the memory in the running system. The syntax of range is start-[end] where start and end are both a memory unit (amount[KMG]). See also - Documentation/kdump/kdump.rst for an example. + Documentation/admin-guide/kdump/kdump.rst for an example. crashkernel=size[KMG],high [KNL, x86_64] range could be above 4G. Allow kernel
@@ -1207,7 +1207,7 @@ Specifies physical address of start of kernel core image elf header and optionally the size. Generally kexec loader will pass this option to capture kernel. - See Documentation/kdump/kdump.rst for details. + See Documentation/admin-guide/kdump/kdump.rst for details. enable_mtrr_cleanup [X86] The kernel tries to adjust MTRR layout from continuous
diff --git a/Documentation/powerpc/firmware-assisted-dump.rst b/Documentation/powerpc/firmware-assisted-dump.rst
index d7fa7c35dd12..9ca12830a48e 100644
--- a/Documentation/powerpc/firmware-assisted-dump.rst
+++ b/Documentation/powerpc/firmware-assisted-dump.rst@@ -61,7 +61,7 @@ as follows: the default calculated size. Use this option if default boot memory size is not sufficient for second kernel to boot successfully. For syntax of crashkernel= parameter, - refer to Documentation/kdump/kdump.rst. If any offset is + refer to Documentation/admin-guide/kdump/kdump.rst. If any offset is provided in crashkernel= parameter, it will be ignored as fadump uses a predefined offset to reserve memory for boot memory dump preservation in case of a crash.
diff --git a/Documentation/translations/zh_CN/oops-tracing.txt b/Documentation/translations/zh_CN/oops-tracing.txt
index 368ddd05b304..c5f3bda7abcb 100644
--- a/Documentation/translations/zh_CN/oops-tracing.txt
+++ b/Documentation/translations/zh_CN/oops-tracing.txt@@ -53,8 +53,8 @@ cat /proc/kmsg > file， 然而你必须介入中止传输， kmsg是一个“ （2）用串口终端启动（请参看Documentation/admin-guide/serial-console.rst），运行一个null modem到另一台机器并用你喜欢的通讯工具获取输出。Minicom工作地很好。 -（3）使用Kdump（请参看Documentation/kdump/kdump.rst）， -使用在Documentation/kdump/gdbmacros.txt中定义的dmesg gdb宏，从旧的内存中提取内核 +（3）使用Kdump（请参看Documentation/admin-guide/kdump/kdump.rst）， +使用在Documentation/admin-guide/kdump/gdbmacros.txt中定义的dmesg gdb宏，从旧的内存中提取内核 环形缓冲区。 完整信息
diff --git a/Documentation/watchdog/hpwdt.rst b/Documentation/watchdog/hpwdt.rst
index 437456bd91a4..9a75720dd51a 100644
--- a/Documentation/watchdog/hpwdt.rst
+++ b/Documentation/watchdog/hpwdt.rst@@ -59,7 +59,7 @@ Last reviewed: 08/20/2018 and loop forever. This is generally not what a watchdog user wants. For those wishing to learn more please see: - Documentation/kdump/kdump.rst + Documentation/admin-guide/kdump/kdump.rst Documentation/admin-guide/kernel-parameters.txt (panic=) Your Linux Distribution specific documentation.
diff --git a/MAINTAINERS b/MAINTAINERS
index ab170522ec55..071b9e5a1664 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS@@ -8571,7 +8571,7 @@ R: Vivek Goyal <vgoyal@redhat.com> L: kexec@lists.infradead.org W: http://lse.sourceforge.net/kdump/ S: Maintained -F: Documentation/kdump/ +F: Documentation/admin-guide/kdump/ KEENE FM RADIO TRANSMITTER DRIVER M: Hans Verkuil <hverkuil@xs4all.nl>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ff0e247573d8..fc495004f148 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig@@ -2009,7 +2009,7 @@ config CRASH_DUMP kdump/kexec. The crash dump kernel must be compiled to a memory address not used by the main kernel - For more details see Documentation/kdump/kdump.rst + For more details see Documentation/admin-guide/kdump/kdump.rst config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address"
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index a8a5fe91c579..9c2275b22904 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig@@ -995,7 +995,7 @@ config CRASH_DUMP reserved region and then later executed after a crash by kdump/kexec. - For more details see Documentation/kdump/kdump.rst + For more details see Documentation/admin-guide/kdump/kdump.rst config XEN_DOM0 def_bool y
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 7440639510a0..b731d22c5b9d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig@@ -624,7 +624,7 @@ config CRASH_DUMP to a memory address not used by the main kernel using PHYSICAL_START. - For more details see Documentation/kdump/kdump.rst + For more details see Documentation/admin-guide/kdump/kdump.rst config KEXEC_JUMP bool "kexec jump (EXPERIMENTAL)"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 586dd3529d14..8ed2e47ef4ba 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig@@ -2052,7 +2052,7 @@ config CRASH_DUMP to a memory address not used by the main kernel or BIOS using PHYSICAL_START, or it must be built as a relocatable image (CONFIG_RELOCATABLE=y). - For more details see Documentation/kdump/kdump.rst + For more details see Documentation/admin-guide/kdump/kdump.rst config KEXEC_JUMP bool "kexec jump"
@@ -2089,7 +2089,7 @@ config PHYSICAL_START the reserved region. In other words, it can be set based on the "X" value as specified in the "crashkernel=YM@XM" command line boot parameter passed to the panic-ed - kernel. Please take a look at Documentation/kdump/kdump.rst + kernel. Please take a look at Documentation/admin-guide/kdump/kdump.rst for more details about crash dumps. Usage of bzImage for capturing the crash dump is recommended as
--
2.21.0