[PATCH v2 1/2] powerpc: Make some functions static
From: Mathieu Malaterre <hidden>
Date: 2019-03-26 20:47:36
Also in:
lkml
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Michael Ellerman, Linus Torvalds
In commit cb9e4d10c448 ("[POWERPC] Add support for 750CL Holly board")
new functions were added. Since most of these functions can be made static,
make it so.
Both holly_power_off and holly_halt functions were not changed since they
are unused, making them static would have triggered the following warning
(treated as error):
arch/powerpc/platforms/embedded6xx/holly.c:244:13: error: 'holly_halt' defined but not used [-Werror=unused-function]
Silence the following warnings triggered using W=1:
arch/powerpc/platforms/embedded6xx/holly.c:47:5: error: no previous prototype for 'holly_exclude_device' [-Werror=missing-prototypes]
arch/powerpc/platforms/embedded6xx/holly.c:190:6: error: no previous prototype for 'holly_show_cpuinfo' [-Werror=missing-prototypes]
arch/powerpc/platforms/embedded6xx/holly.c:196:17: error: no previous prototype for 'holly_restart' [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <redacted>
---
v2: Split the patch in two operations
arch/powerpc/platforms/embedded6xx/holly.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 0409714e8070..9d2eefef7b7b 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c@@ -44,7 +44,8 @@ #define HOLLY_PCI_CFG_PHYS 0x7c000000 -int holly_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) +static int holly_exclude_device(struct pci_controller *hose, u_char bus, + u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND;
@@ -187,13 +188,13 @@ static void __init holly_init_IRQ(void) tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); } -void holly_show_cpuinfo(struct seq_file *m) +static void holly_show_cpuinfo(struct seq_file *m) { seq_printf(m, "vendor\t\t: IBM\n"); seq_printf(m, "machine\t\t: PPC750 GX/CL\n"); } -void __noreturn holly_restart(char *cmd) +static void __noreturn holly_restart(char *cmd) { __be32 __iomem *ocn_bar1 = NULL; unsigned long bar;
--
2.20.1