On Wed, Mar 06, 2019 at 12:12:07PM +0100, Patrick Havelange wrote:
quoted hunk ↗ jump to hunk
This adds documentation for the specific prescaler entry.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
---
Changes v2
- Add doc for prescaler entry
---
.../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
new file mode 100644
index 000000000000..2da629d6d485
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
@@ -0,0 +1,16 @@
+What: /sys/bus/counter/devices/counterX/countY/prescaler_available
+KernelVersion: 5.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Discrete set of available values for the respective Count Y
+ configuration are listed in this file. Values are delimited by
+ newline characters.
+
+What: /sys/bus/counter/devices/counterX/countY/prescaler
+KernelVersion: 5.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Configure the prescaler value associated with Count Y.
+ On the FlexTimer, the counter clock source passes through a
+ prescaler that is a 7-bit counter. This acts like a clock
+ divider.
--
2.19.1
Hmm, prescalers seem common enough among counter devices to permit these
attributes to be listed in the sysfs-bus-counter documentation file.
However, I'd like to wait until we get another counter driver for a
device with a prescaler before we make that move. From there, we'll have
a better vantage point to determine a fitting standard prescaler
attribute behavior.
So for now, we'll keep these attributes documented here in the
sysfs-bus-counter-ftm-quaddec file, until the time comes to broach the
discussion again.
William Breathitt Gray