When CONFIG_BDI_SWITCH is set, the page tables have to be populated
allthough large TLBs are used, because the BDI switch knows nothing
about those large TLBs which are handled directly in TLB miss logic.

Signed-off-by: Christophe Leroy <redacted>
---
 arch/powerpc/mm/pgtable_32.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index fd665c32a1f7..94bd7d013557 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c

@@ -261,7 +261,10 @@ void __init mapin_ram(void)
 		unsigned long top = base + reg->size;
 
 		base = mmu_mapin_ram(base, top);
-		__mapin_ram_chunk(base, top);
+		if (IS_ENABLED(CONFIG_BDI_SWITCH))
+			__mapin_ram_chunk(reg->base, top);
+		else
+			__mapin_ram_chunk(base, top);
 	}
 }
 

-- 
2.13.3