Re: [alsa-devel] [PATCH v2 4/4] ASoC: add imx-audmix DT binding documentation

On Tue, Jan 15, 2019 at 10:58 PM Rob Herring [off-list ref] wrote:

On Tue, Jan 08, 2019 at 01:05:51PM +0000, Viorel Suman wrote:

quoted

Add the DT binding documentation for Audio Mixer
machine driver.

Signed-off-by: Viorel Suman <redacted>
---
 .../devicetree/bindings/sound/imx-audmix.txt       | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/imx-audmix.txt

diff --git a/Documentation/devicetree/bindings/sound/imx-audmix.txt b/Documentation/devicetree/bindings/sound/imx-audmix.txt
new file mode 100644
index 0000000..6ac1230
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audmix.txt

@@ -0,0 +1,24 @@
+NXP Audio Mixer (AUDMIX) machine driver.
+
+Required properties:
+===================================
+  - compatible               : Compatible list, contains "fsl,imx-audmix"
+
+  - model            : Short audio card description.
+
+  - dais             : Must contain a list of phandles to AUDMIX connected
+                       DAIs. The current implementation requires two phandles
+                       to SAI interfaces to be provided, the first SAI in the
+                       list being used to route the AUDMIX output.
+
+  - audmix-controller        : Must contain the phandle to the AUDMIX device node.

I don't think you need 2 nodes for this as this one is just a virtual
device. Just add the dais property to the audmix node.

Hi Rob,

Thanks for the suggestion. We want to understand better the reasoning
behind this.

Is it because dais are physically connected to AUDMIX node?

In ALSA we usually add all the components inside the
associated machine driver virtual node.

thanks,
Daniel.