Re: System not booting since dm changes? (was Linux 4.20-rc1)

On Mon, Nov 05, 2018 at 08:51:57AM -0500, Mike Snitzer wrote:

On Mon, Nov 05 2018 at  5:25am -0500,
Michael Ellerman [off-list ref] wrote:

quoted

Linus Torvalds [off-list ref] writes:
...

quoted

Mike Snitzer (1):
    device mapper updates

Hi Mike,

Replying here because I can't find the device-mapper pull or the patch
in question on LKML. I guess I should be subscribed to dm-devel.

We have a box that doesn't boot any more, bisect points at one of:

  cef6f55a9fb4 Mike Snitzer       dm table: require that request-based DM be layered on blk-mq devices 
  953923c09fe8 Mike Snitzer       dm: rename DM_TYPE_MQ_REQUEST_BASED to DM_TYPE_REQUEST_BASED 
  6a23e05c2fe3 Jens Axboe         dm: remove legacy request-based IO path 


It's a Power8 system running Rawhide, it does have multipath, but I'm
told it was setup by the Fedora installer, ie. nothing fancy.

The symptom is the system can't find its root filesystem and drops into
the initramfs shell. The dmesg includes a bunch of errors like below:

  [   43.263460] localhost multipathd[1344]: sdb: fail to get serial
  [   43.268762] localhost multipathd[1344]: mpatha: failed in domap for addition of new path sdb
  [   43.268762] localhost multipathd[1344]: uevent trigger error
  [   43.282065] localhost kernel: device-mapper: table: table load rejected: not all devices are blk-mq request-stackable

...

quoted

Any ideas what's going wrong here?

"table load rejected: not all devices are blk-mq request-stackable"
speaks to the fact that you aren't using blk-mq for scsi (aka scsi-mq).

You need to use scsi_mod.use_blk_mq=Y on the kernel commandline (or set
CONFIG_SCSI_MQ_DEFAULT in your kernel config)

Thanks Mike!, above solution worked and the system booted fine now:-)

# uname -r
4.20.0-rc1+
# cat /proc/cmdline 
root=/dev/mapper/fedora_ltc--test--ci2-root ro rd.lvm.lv=fedora_ltc-test-ci2/root rd.lvm.lv=fedora_ltc-test-ci2/swap scsi_mod.use_blk_mq=Y

CONFIG_SCSI_MQ_DEFAULT kernel was not set in my kernel config, will set in future runs.

Thanks Michael!

Regards,
-Satheesh.

Mike